Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of NORYL™ Resin N850 - Europe - (PPE+PS) - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for NORYL™ Resin N850 - Europe:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Noryl datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés diverses - Recommandations pour la transformation Moulage par injection
Any use of this information falls under the rules of our disclaimer.
Informations produit
NORYL™ N850 resin is a non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS). This high flow, injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of 5VA at 3mm and V0 at 1.5mm along with UL746C Outdoor Suitability rating of F2. NORYL N850 resin exhibits high impact strength, dimensional stability, hydrolytic stability, and very low moisture absorption. This material is an excellent candidate for electrical and business equipment applications.
Caractéristiques des transformations/physiquesValeurUnitéNorme du test
ASTM Data
Indice de fluidité, MFI 18 g/10min ASTM D 1238
Température 260 °C -
Charge 3.8 kg -
Propriétés mécaniquesValeurUnitéNorme du test
ISO Data
Module en traction 2950 MPa ISO 527
Contrainte d'écoulement 66 MPa ISO 527
Déformation au seuil d'écoulement 3.2 % ISO 527
Contrainte à la rupture 61 MPa ISO 527
Déformation à la rupture 4.5 % ISO 527
Module de flexion 2600 MPa ISO 178
Résistance au choc Izod (entaillé), +23°C, 4mm 10 kJ/m² ISO 180/1A
ASTM Data
Module en traction 2620 MPa ASTM D 638
Module de traction d’élasticité 62 MPa ASTM D 638
Résistance de traction à la rupture 48 MPa ASTM D 638
Allongement d’élasticité 3.6 % ASTM D 638
Allongement à la rupture 18 % ASTM D 638
Module de flexion 2410 MPa ASTM D 790
Izod choc avec entaille, 1/8 in 213 J/m ASTM D 256
Propriétés thermiquesValeurUnitéNorme du test
ISO Data
Température de fléchissement s/chrg, 1.80 MPa 82 °C ISO 75-1/-2
Température de fléchissement s/chrg, 0.45 MPa 95 °C ISO 75-1/-2
Température de ramolliss. Vicat, 120°C/h 50N 108 °C ISO 306
Inflammabilité ep. nom. 1.5 mm V-0 class IEC 60695-11-10
Epaisseur de l'éprouvette 1.5 mm -
Inflammabilité pr. épaisseur h HB class IEC 60695-11-10
Epaisseur de l'éprouvette 1.0 mm -
Inflammabilité 5V pr. épaisseur h 5VA class IEC 60695-11-20
Epaisseur de l'éprouvette 3.0 mm -
ASTM Data
DTUL à 66 psi 93 °C ASTM D 648
DTUL à 264 psi 82 °C ASTM D 648
Vicat température 101 °C ASTM D 1525
Propriétés diversesValeurUnitéNorme du test
Densité 1130 kg/m³ ASTM D 792
Recommandations pour la transformation Moulage par injectionValeurUnitéNorme du test
Pré-séchage - température 75 - 80 °C -
Pré-séchage - temps 3 - 4 h -
L'humidité de traitement ≤-0.02 % -
Température de la matière fondue 250 - 275 °C -
Température du moule 55 - 75 °C -
Zone 1 215 - 265 °C -
Zone 2 225 - 270 °C -
Zone 3 240 - 275 °C -
Vitesse de rotation de vis 20 - 100 rpm -
Contre-pression 0.3 - 0.7 MPa -
Caractéristiques
Transformation
Moulage par injection
Additifs
Agent ignifugeant
Propriétés spéciales
Ignifugé
Résistance Chimique
Stabilité hydrolytique
Disponibilité régionale
Europe
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.