Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of NORYL™ Resin FE1410PW - Americas - (PPE+PS)-GF10 - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for NORYL™ Resin FE1410PW - Americas:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Noryl datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés diverses - Recommandations pour la transformation Moulage par injection
Any use of this information falls under the rules of our disclaimer.
Informations produit
NORYL™ FE1410PW resin is a 10% glass reinforced blend of polyphenylene ether (PPE) + crystal clear polystyrene (ccPS). This injection moldable material is FC EU, FDA food contact compliant, NSF/ANSI 61*, ACS, WRAS, KTW, and W270 listed for global potable water use. NORYL FE1410PW resin exhibits excellent long-term hydrolytic stability, very low moisture absorption, heat / hot water resistance and is an excellent candidate for a variety of water management applications such as pump housings, impellers, shower/faucet, membrane housings and valves. *NSF certification is color dependent.
Caractéristiques des transformations/physiquesValeurUnitéNorme du test
ISO Data
Indice de fluidité à chaud en volume, MVR 32 cm³/10min ISO 1133
Température 280 °C -
Charge 10 kg -
Propriétés mécaniquesValeurUnitéNorme du test
ISO Data
Module en traction 4930 MPa ISO 527
Contrainte à la rupture 94 MPa ISO 527
Déformation à la rupture 2.7 % ISO 527
Module de flexion 4880 MPa ISO 178
Résistance au choc Charpy, +23°C 14 kJ/m² ISO 179/1eU
Résistance au choc Charpy, -30°C 14 kJ/m² ISO 179/1eU
Izod impact strength, +23°C, 4mm 13 kJ/m² ISO 180/1U
Izod impact strength, -30°C, 4mm 13 kJ/m² ISO 180/1U
Résistance au choc Izod (entaillé), +23°C, 4mm 4 kJ/m² ISO 180/1A
Résistance au choc Izod (entaillé), -30°C, 4mm 4 kJ/m² ISO 180/1A
ASTM Data
Module en traction 4770 MPa ASTM D 638
Résistance de traction à la rupture 94 MPa ASTM D 638
Allongement à la rupture 2.8 % ASTM D 638
Module de flexion 4860 MPa ASTM D 790
Izod choc avec entaille, 1/8 in 35 J/m ASTM D 256
Izod choc avec entaille, bas température 35 J/m ASTM D 256
Température -30 °C -
Résistance au choc Izod, 1/8 in 230 J/m ASTM D 256
Propriétés thermiquesValeurUnitéNorme du test
ISO Data
Température de ramolliss. Vicat, A 146 °C ISO 306
Température de ramolliss. Vicat, 120°C/h 50N 140 °C ISO 306
ASTM Data
DTUL à 264 psi 127 °C ASTM D 648
Propriétés diversesValeurUnitéNorme du test
Absorption d'eau 0.2 % Sim. to ISO 62
Masse volumique 1130 kg/m³ ISO 1183
Recommandations pour la transformation Moulage par injectionValeurUnitéNorme du test
Pré-séchage - température 100 - 120 °C -
Pré-séchage - temps 2 - 4 h -
L'humidité de traitement ≤0.02 % -
Température de la matière fondue 280 - 300 °C -
Température du moule 80 - 120 °C -
Température - Zone d'alimentation 60 - 80 °C -
Zone 1 250 - 270 °C -
Zone 2 270 - 290 °C -
Zone 3 290 - 310 °C -
Caractéristiques
Transformation
Moulage par injection
Résistance Chimique
Stabilité hydrolytique
Certifications
Contact alimentaire, FDA 21 CFR approbation
Disponibilité régionale
Amérique du nord
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.