Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LEXAN™ Copolymer EXL4412 - PC-GF20 - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for LEXAN™ Copolymer EXL4412:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Lexan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés diverses - Recommandations pour la transformation Moulage par injection
Any use of this information falls under the rules of our disclaimer.
Informations produit
LEXAN EXL4412 copolymer is a 20% glass fiber reinforced Polycarbonate Copolymer, medium flow, impact modified, injection moldable grade. EXL4412 is available in opaque colors only and is an excellent candidate for a broad range of applications that require a combination of stiffness and ductility.

UL Yellow Card Link E207780-103834023
Caractéristiques des transformations/physiquesValeurUnitéNorme du test
ISO Data
Indice de fluidité à chaud en volume, MVR 10 cm³/10min ISO 1133
Température 300 °C -
Charge 1.2 kg -
ASTM Data
Indice de fluidité, MFI 11 g/10min ASTM D 1238
Température 300 °C -
Charge 1.2 kg -
Propriétés mécaniquesValeurUnitéNorme du test
ISO Data
Module en traction 6500 MPa ISO 527
Contrainte à la rupture 110 MPa ISO 527
Déformation à la rupture 3 % ISO 527
Module de flexion 5700 MPa ISO 178
Résistance au choc Charpy (entaillé), +23°C, 3mm 17 kJ/m² ISO 179/1eA
Résistance au choc Charpy (entaillé), -30°C, 3mm 12 kJ/m² ISO 179/1eA
Résistance au choc Izod (entaillé), +23°C, 3mm 17 kJ/m² ISO 180/1A
Résistance au choc Izod (entaillé), -30°C, 3mm 12 kJ/m² ISO 180/1A
ASTM Data
Module en traction 6300 MPa ASTM D 638
Résistance de traction à la rupture 100 MPa ASTM D 638
Allongement à la rupture 3 % ASTM D 638
Module de flexion 5800 MPa ASTM D 790
Izod choc avec entaille, 1/8 in 140 J/m ASTM D 256
Résistance au choc Izod, 1/8 in 700 J/m ASTM D 256
Propriétés thermiquesValeurUnitéNorme du test
ISO Data
Température de ramolliss. Vicat, 120°C/h 50N 142 °C ISO 306
Inflammabilité pr. épaisseur h V-1 class IEC 60695-11-10
Epaisseur de l'éprouvette 2.0 mm -
ASTM Data
DTUL à 66 psi 135 °C ASTM D 648
DTUL à 264 psi 132 °C ASTM D 648
Propriétés diversesValeurUnitéNorme du test
Absorption d'eau 0.1 % Sim. to ISO 62
Absorption d'humidité 0.03 % Sim. to ISO 62
Masse volumique 1330 kg/m³ ISO 1183
Densité 1330 kg/m³ ASTM D 792
Recommandations pour la transformation Moulage par injectionValeurUnitéNorme du test
Pré-séchage - température 110 °C -
Pré-séchage - temps 3 - 6 h -
L'humidité de traitement ≤0.02 % -
Température de la matière fondue 285 - 310 °C -
Température du moule 80 - 110 °C -
Zone 1 260 - 280 °C -
Zone 2 270 - 290 °C -
Zone 3 280 - 300 °C -
Vitesse de rotation de vis 50 - 90 rpm -
Contre-pression 0.1 - 0.3 MPa -
Caractéristiques
Transformation
Moulage par injection
Propriétés spéciales
Modifié choc
Disponibilité régionale
Amérique du nord, Europe, Asia Pacific
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.