Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of EPLON 6 GFR 30 BK Q1D001 - PA6-GF30 - Epsan Plastik San. Tic. A.Ş

Material Data Center offers the following functions for EPLON 6 GFR 30 BK Q1D001:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Eplon datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés diverses - Recommandations pour la transformation Moulage par injection
Any use of this information falls under the rules of our disclaimer.
Caractéristiques des transformations/physiquesValeurUnitéNorme du test
ISO Data
Retrait au moulage, parallèle 0.4 % ISO 294-4, 2577
Retrait au moulage, perpendiculaire 0.7 % ISO 294-4, 2577
Propriétés mécaniquesValeurUnitéNorme du test
ISO Data
Module en traction 8500 MPa ISO 527
Contrainte à la rupture 150 MPa ISO 527
Déformation à la rupture 4 % ISO 527
Module de flexion, 23°C 7500 MPa ISO 178
Résistance au choc Charpy (entaillé), +23°C 13.5 kJ/m² ISO 179/1eA
Résistance au choc Izod avec entaille, +23°C 13 kJ/m² ISO 180/1A
Propriétés thermiquesValeurUnitéNorme du test
ISO Data
Température de fusion, 10°C/min 220 °C ISO 11357-1/-3
Inflammabilité ep. nom. 1.5 mm HB class IEC 60695-11-10
Epaisseur de l'éprouvette 1.6 mm -
ASTM Data
UL 94 inflammabilité HB - UL 94
Épaisseur testée 1.6 mm -
Propriétés diversesValeurUnitéNorme du test
Masse volumique 1330 kg/m³ ISO 1183
Recommandations pour la transformation Moulage par injectionValeurUnitéNorme du test
Pré-séchage - température 80 °C -
Pré-séchage - temps 2 - 4 h -
Température de la matière fondue 260 °C -
Caractéristiques
Transformation
Moulage par injection
Conditionnement
Couleurs naturelles
Propriétés spéciales
Stabilisé à la chaleur
Disponibilité régionale
Europe
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.