Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Elastollan® B 60 D - (TPU-ARES) - BASF Polyurethanes GmbH

Check here, which other Elastollan datasheets, application examples or technical articles are available in Material Data Center

Propriétés mécaniques - Propriétés thermiques - Propriétés électriques - Propriétés diverses - Préparation et conditionnement des éprouvettes - Fonctions

Any use of this information falls under the rules of our disclaimer.

Informations produit

DESCRIPTION
Elastollan B 60 D is a polyester based TPU

SPECIAL PROPERTIES
good wear performance, good damping behavior and rebound elasticity,
good flexibility at low temperature, good tensile strength

TYPICAL APPLICATIONS
skiing boots, shoe applications, damping elements,
roller tyres for conveyor systems and shopping trolleys

OTHER HINTS
predrying: 2-3h at 100-110°C
(air circulating oven or dehumidified air dryer),
max. content of humidity before processing: 0,02%
annealing: 20 h at 100°C in order to get optimum properties

CHEMICAL RESISTANCE
For detailed information on the chemical resistance of our
materials refer to this list of chemical resistance

Propriétés mécaniques	Valeur	Unité	Norme du test
ISO Data
Module en traction	240	MPa	ISO 527
Contrainte pr. une déform. de 50%	13	MPa	ISO 527
Déformation à la rupture	>50	%	ISO 527
Contrainte à 100% de déformation	12	MPa	ISO 527
Contrainte à 300% de déformation	30	MPa	ISO 527
Contrainte à la rupture TPE	55	MPa	ISO 527
Déformation à la rupture TPE	>300	%	ISO 527
Déformation rémanente en compression à 23 °C, 24h	35	%	ISO 815
Déformation rémanente en compression à 70 °C, 24h	45	%	ISO 815
Résistance à la déchirure	150	kN/m	ISO 34-1
Résistance à l'abrasion	25	mm³	ISO 4649
Dureté Shore D	55	-	ISO 7619-1

Propriétés thermiques	Valeur	Unité	Norme du test
ISO Data
Température de transition vitreuse, 10°C/min	-24	°C	ISO 11357-1/-2

Propriétés électriques	Valeur	Unité	Norme du test
ISO Data
Indice de résistance au cheminement	600	-	IEC 60112

Propriétés diverses	Valeur	Unité	Norme du test
Masse volumique	1230	kg/m³	ISO 1183

Préparation et conditionnement des éprouvettes	Valeur	Unité	Norme du test
ISO Data
Injection, température de la matière fondue	230	°C	ISO 294
Injection, température du moule	60	°C	ISO 294

Fonctions

Caractéristiques

Transformation

Moulage par injection, Extrusion de profilés

Conditionnement

Granulés

Disponibilité régionale

Amérique du nord, Europe, Asia Pacific, South and Central America, Proche-Orient/Afrique

Autres informations

Moulages par injection

Barrel temperature : 210 - 225 °C
Melt temperature : 225 °C
Mold temperature: 25 - 40 °C

Conditions générales

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.