Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Cawiton MT990 - SEBS - Wittenburg B.V.

Material Data Center offers the following functions for Cawiton MT990:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Cawiton datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés diverses - Recommandations pour la transformation Moulage par injection
Any use of this information falls under the rules of our disclaimer.
Caractéristiques des transformations/physiquesValeurUnitéNorme du test
ISO Data
Indice de fluidité, MFI 35 g/10min ISO 1133
Température 230 °C -
Charge 5 kg -
Propriétés mécaniquesValeurUnitéNorme du test
ISO Data
Résistance à la traction 9.2 MPa ISO 37
Déformation à la rupture 507 % ISO 37
Déformation rémanente en compression à 70 °C, 24h 65 % ISO 815
Résistance à la déchirure 55.7 kN/m ISO 34-1
Dureté Shore A 90 - ISO 7619-1
Other Standards[S]
Contrainte à 100% de déformation 5.3 MPa ISO 37
Contrainte à 300% de déformation 18.6 MPa ISO 37
S: These properties are reported by the producer according standards that are different to our defaults.
Propriétés thermiquesValeurUnitéNorme du test
ISO Data
Température de fusion, 10°C/min 166 °C ISO 11357-1/-3
Propriétés diversesValeurUnitéNorme du test
Masse volumique 900 kg/m³ ISO 1183
Recommandations pour la transformation Moulage par injectionValeurUnitéNorme du test
Température de la matière fondue 180 - 240 °C -
Température du moule 20 - 40 °C -
Température - Zone d'alimentation 30 - 60 °C -
Zone 1 180 - 220 °C -
Zone 2 190 - 230 °C -
Zone 3 190 - 230 °C -
Température de la buse 200 - 240 °C -
Caractéristiques
Transformation
Moulage par injection
Propriétés spéciales
Translucent, Stérilisable, Stérilisation par oxyde d'éthylène (EtO), Stérilisation à la vapeur, Stérilisation par rayonnement gamma
Résistance Chimique
Résistance au rayonnement
Certifications
Contact alimentaire, Grade médical, Biocompatibility ISO 10993, USP Class VI approbation
Applications
Médical
Disponibilité régionale
Europe
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.