Any use of this information falls under the rules of our
disclaimer.
Caractéristiques des transformations/physiques | Valeur | Unité | Norme du test |
ISO Data |
Indice de fluidité, MFI |
6 |
g/10min |
ISO 1133 |
Température |
200 |
°C |
- |
Charge |
5 |
kg |
- |
Retrait au moulage, parallèle |
0.5 |
% |
ISO 294-4, 2577 |
Propriétés mécaniques | Valeur | Unité | Norme du test |
ISO Data |
Résistance à la traction |
41 |
MPa |
ISO 527 |
Module de flexion, 23°C |
2250 |
MPa |
ISO 178 |
Résistance à la flexion |
54 |
MPa |
ISO 178 |
Résistance au choc Charpy, +23°C |
23 |
kJ/m² |
ISO 179/1eU |
Résistance au choc Charpy (entaillé), +23°C |
1.1 |
kJ/m² |
ISO 179/1eA |
Dureté Shore D |
75 |
- |
ISO 7619-1 |
Dureté Rockwell |
R 78 |
- |
ISO 2039-2 |
Propriétés thermiques | Valeur | Unité | Norme du test |
ISO Data |
Température de fléchissement s/chrg, 1.80 MPa |
69 |
°C |
ISO 75-1/-2 |
Température de ramolliss. Vicat, A |
96 |
°C |
ISO 306 |
Propriétés optiques | Valeur | Unité | Norme du test |
ISO Data |
Haze |
3 |
- |
ISO 14782 |
Other Standards[S] |
Lumière á Transmittance |
90 |
% |
ISO 13468 |
S: | These properties are reported by the producer according standards that are different to our defaults. |
Propriétés diverses | Valeur | Unité | Norme du test |
Absorption d'eau |
0.1 |
% |
Sim. to ISO 62 |
Masse volumique |
1020 |
kg/m³ |
ISO 1183 |
Recommandations pour la transformation Moulage par injection | Valeur | Unité | Norme du test |
Température de la matière fondue |
180 - 220 |
°C |
- |
Température du moule |
50 |
°C |
- |
Zone 1 |
180 - 200 |
°C |
- |
Température de la buse |
200 |
°C |
- |
Pressions d'injection |
67 |
MPa |
- |
Contre-pression |
6 |
MPa |
- |
Recommandations pour la transformation Extrusion | Valeur | Unité | Norme du test |
Température du moule |
60 - 80 |
°C |
- |
Zone 1 |
170 |
°C |
- |
Zone 2 |
180 |
°C |
- |
Zone 3 |
185 |
°C |
- |
Zone 4 |
190 |
°C |
- |
Zone 5 |
200 |
°C |
- |
Température de la buse |
200 |
°C |
- |
Caractéristiques
Transformation
Moulage par injection, Extrusion (autres)
Propriétés spéciales
Transparent
Caractéristiques
High Gloss, Copolymère
Certifications
Contact alimentaire, Approuvé pour le contact alimentaire suivant 10/2011, FDA 21 CFR approbation
Applications
Emballage
Disponibilité régionale
Amérique du nord, Europe, Asia Pacific, Proche-Orient/Afrique
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com