Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Amilan® CM1061 - PA6 - Toray Industries, Inc.

Material Data Center offers the following functions for Amilan® CM1061:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Amilan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Propriétés mécaniques - Propriétés thermiques - Propriétés électriques - Propriétés diverses
Any use of this information falls under the rules of our disclaimer.
Propriétés mécaniquessec / condUnitéNorme du test
ISO Data
Résistance à la traction 80 / 35 MPa ISO 527
Déformation à la rupture 40 / 50 % ISO 527
Module de flexion, 23°C 2600 / 800 MPa ISO 178
Dureté Rockwell R 119 - ISO 2039-2
Propriétés thermiquessec / condUnitéNorme du test
ISO Data
Température de fusion, 10°C/min 225 / * °C ISO 11357-1/-3
Température de fléchissement s/chrg, 1.80 MPa 65 / * °C ISO 75-1/-2
Température de fléchissement s/chrg, 0.45 MPa 182 / * °C ISO 75-1/-2
Coeffic. de dilatation therm. linéique, parallèle 80 / * E-6/K ISO 11359-1/-2
Propriétés électriquessec / condUnitéNorme du test
ISO Data
Résistivité transversale 1E13 / 1E10 Ohm*m IEC 62631-3-1
Rigidité diélectrique 20 / - kV/mm IEC 60243-1
Propriétés diversessec / condUnitéNorme du test
Absorption d'eau 10.5 / * % Sim. to ISO 62
Masse volumique 1130 / - kg/m³ ISO 1183
Caractéristiques
Transformation
Extrusion (autres), Soufflage
Disponibilité régionale
Amérique du nord, Europe, Asia Pacific, South and Central America, Proche-Orient/Afrique
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.