Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of VYTEEN ABS 2904 - ABS - Lavergne

Material Data Center offers the following functions for VYTEEN ABS 2904:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Vyteen datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Caractéristiques des transformations/physiquesValeurUnitéNorme du test
ISO Data
Indice de fluidité, MFI 7 g/10min ISO 1133
Température 230 °C -
Charge 3.8 kg -
ASTM Data
Indice de fluidité, MFI 7 g/10min ASTM D 1238
Température 200 °C -
Charge 5 kg -
Retrait au moulage , parallèle 0.007 mm/mm ASTM D 955
Retrait au moulage, perpendiculaire 0.008 mm/mm ASTM D 955
Propriétés mécaniquesValeurUnitéNorme du test
ISO Data
Module en traction 2000 MPa ISO 527
Contrainte d'écoulement 35 MPa ISO 527
Module de flexion, 23°C 2200 MPa ISO 178
Résistance au choc Charpy (entaillé), +23°C 15 kJ/m² ISO 179/1eA
Résistance au choc Charpy (entaillé), -30°C 7 kJ/m² ISO 179/1eA
ASTM Data
Module de traction d’élasticité 39 MPa ASTM D 638
Module de flexion 2100 MPa ASTM D 790
Résistance à la flexion 66 MPa ASTM D 790
Dureté Rockwell R 85 - ASTM D 785
Izod choc avec entaille, 1/8 in 170 J/m ASTM D 256
Propriétés thermiquesValeurUnitéNorme du test
ISO Data
Température de fléchissement s/chrg, 0.45 MPa 90 °C ISO 75-1/-2
Température de ramolliss. Vicat, B 86 °C ISO 306
ASTM Data
UL 94 inflammabilité HB - UL 94
DTUL à 66 psi 80 °C ASTM D 648
Propriétés diversesValeurUnitéNorme du test
Masse volumique 1050 kg/m³ ISO 1183
Densité 1070 kg/m³ ASTM D 792
Caractéristiques
Transformation
Moulage par injection
Conditionnement
Noir
Propriétés spéciales
Modifié choc
Applications
Automobile, Électrotechnique et électrique
Disponibilité régionale
Amérique du nord, Europe, Asia Pacific, South and Central America
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.