Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of VESTAMID® L2124 BK 9.7507 - PA12 - Evonik Operations GmbH

Material Data Center offers the following functions for VESTAMID® L2124 BK 9.7507:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, parameters for material models, CAE Interfaces

Check here, which other Vestamid datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Informations produit
High viscosity, plasticized, heat and light stabilized PA12 Compound

VESTAMID® L2124 BK 9.7507 is a plasticized, heat- and light- stabilized polyamide 12 compound for the extrusion of flexible tubing and hoses especially for oil and petrochemical applications. Tubing according to DIN 73 378, Type: PA 12-PHL.

Properties of compounds based on PA 12 vary little with changing humidity due to low moisture absorption. Parts made of this semi-crystalline material are characterized by exceptional impact strength, low coefficient of friction and good chemical resistance.

VESTAMID® L2124 BK 9.7507 is characterized by a high melt viscosity and good dimensional control during pipe extrusion.

VESTAMID® L2124 BK 9.7507 is supplied as cylindrical granules, ready for processing, in moisture-proof bags.

Pigmentation may affect values.

Inside the original and undamaged packaging, the product has a shelf life of at least 2 years when stored in dry rooms at temperatures not exceeding 30°C.

For information about processing of VESTAMID®, please follow the general commendations about “Processing of VESTAMID® compounds”. 

FOR FURTHER INFORMATION PLEASE CONTACT US AT EVONIK-HP@EVONIK.COM
OR VISIT OUR PRODUCT AT  WWW.VESTAMID.COM
Caractéristiques des transformations/physiquessec / condUnitéNorme du test
ISO Data
Indice de fluidité à chaud en volume, MVR 9 / * cm³/10min ISO 1133
Température 230 / * °C -
Charge 5 / * kg -
Retrait au moulage, parallèle 0.7 / * % ISO 294-4, 2577
Retrait au moulage, perpendiculaire 1.3 / * % ISO 294-4, 2577
Propriétés mécaniquessec / condUnitéNorme du test
ISO Data
Module en traction 400 / 420 MPa ISO 527
Contrainte d'écoulement 28 / 27 MPa ISO 527
Déformation au seuil d'écoulement 33 / 29 % ISO 527
Déformation nominale à la rupture >50 / >50 % ISO 527
Module de fluage en traction, 1h * / 310 MPa ISO 899-1
Module de fluage en traction, 1000h * / 290 MPa ISO 899-1
Résistance au choc Charpy, +23°C N / N kJ/m² ISO 179/1eU
Résistance au choc Charpy, -30°C N / N kJ/m² ISO 179/1eU
Résistance au choc Charpy (entaillé), +23°C 150 / N kJ/m² ISO 179/1eA
Résistance au choc Charpy (entaillé), -30°C 6 / 7 kJ/m² ISO 179/1eA
Type de défaillance C / C - -
Propriétés thermiquessec / condUnitéNorme du test
ISO Data
Température de fusion, 10°C/min 171 / * °C ISO 11357-1/-3
Température de fléchissement s/chrg, 1.80 MPa 45 / * °C ISO 75-1/-2
Température de fléchissement s/chrg, 0.45 MPa 98 / * °C ISO 75-1/-2
Température de ramolliss. Vicat, B 125 / * °C ISO 306
Coeffic. de dilatation therm. linéique, parallèle 170 / * E-6/K ISO 11359-1/-2
Coeffic. de dilatation therm. linéique, perpend. 160 / * E-6/K ISO 11359-1/-2
Inflammabilité ep. nom. 1.5 mm HB / * class IEC 60695-11-10
Epaisseur de l'éprouvette 1.6 / * mm -
Propriétés électriquessec / condUnitéNorme du test
ISO Data
Permittivité relative, 100Hz 12 / 15 - IEC 62631-2-1
Permittivité relative, 1MHz 3.8 / 4.1 - IEC 62631-2-1
Facteur de pertes, 100Hz 1600 / 1600 E-4 IEC 62631-2-1
Facteur de pertes, 1MHz 1500 / 1900 E-4 IEC 62631-2-1
Résistivité transversale 1E10 / 1E9 Ohm*m IEC 62631-3-1
Résistivité superficielle * / 2E13 Ohm IEC 62631-3-2
Rigidité diélectrique 37 / 30 kV/mm IEC 60243-1
Indice de résistance au cheminement 600 / 600 - IEC 60112
Propriétés diversessec / condUnitéNorme du test
Absorption d'eau 1.3 / * % Sim. to ISO 62
Absorption d'humidité 0.5 / * % Sim. to ISO 62
Masse volumique 1030 / 1030 kg/m³ ISO 1183
Fonctions
Contrainte / Déformation , VESTAMID® L2124 BK 9.7507 (sec), PA12, Evonik
Module sécant / Déformation , VESTAMID® L2124 BK 9.7507 (sec), PA12, Evonik
Contrainte / Déformation (isochrone) 23°C, VESTAMID® L2124 BK 9.7507 (cond.), PA12, Evonik
Module de fluage / Temps 23°C, VESTAMID® L2124 BK 9.7507 (cond.), PA12, Evonik
Courbe de fluage 23°C, VESTAMID® L2124 BK 9.7507 (cond.), PA12, Evonik
Module de traction / Température , VESTAMID® L2124 BK 9.7507 (sec), PA12, Evonik
Caractéristiques
Transformation
Moulage par injection, Extrusion de tubes, Extrusion de profilés, Extrusion (autres)
Conditionnement
Granulés, Noir
Additifs
Lubrifiant, Plastifiant
Propriétés spéciales
Modifié choc, Stabilisé à la lumière, Stabilisé aux intempéries, Stabilisé à la chaleur
Caractéristiques
Grade tribologique
Résistance Chimique
Résistance chimique générale, Résistance aux huiles
Disponibilité régionale
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.