View Datasheet in other language

E-mail to a friend

Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of VESTAMID® L-GF15 - PA12-GF15 - Evonik Operations GmbH

Material Data Center offers the following functions for VESTAMID® L-GF15:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, parameters for material models, CAE Interfaces

Check here, which other Vestamid datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:

Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés électriques - Propriétés diverses - Fonctions

Any use of this information falls under the rules of our disclaimer.

Informations produit

Glass fibre reinforced (15%) PA12 resin for the injection moulding of rigid and tough parts

VESTAMID® L-GF15 NC is a glass fiber –reinforced heat stabilized Polyamide 12 for injection molding. The material contains about 15% glass fibers, an ageing protective agent and a processing aid for a fast and even form filling. Due to the reinforcement moldings from this compound exhibit a higher strength and good heat resistance, excellent for gear housings for electric window openers in cars.

Further advantages of VESTAMID® L-GF15 NC are the characterizing properties of PA12, e.g., low water absorption, good dimensional stability and nearly constant mechanical properties at changing ambient humidity.

VESTAMID® L-GF15 NC is supplied as cylindrical granules, ready for processing, in moisture-proof bags.

Pigmentation may affect values.

Inside the original and undamaged packaging, the product has a shelf life of at least 2 years when stored in dry rooms at temperatures not exceeding 30°C.

For information about processing of VESTAMID®, please follow the general commendations about “Processing of VESTAMID® compounds”.

FOR FURTHER INFORMATION PLEASE CONTACT US AT EVONIK-HP@EVONIK.COM

OR VISIT OUR PRODUCT AT WWW.VESTAMID.COM

Caractéristiques des transformations/physiques

sec / cond

Unité

Norme du test

ISO Data

Indice de fluidité à chaud en volume, MVR

55 / *

cm³/10min

ISO 1133

Température

275 / *

°C

Charge

5 / *

Retrait au moulage, parallèle

0.3 / *

ISO 294-4, 2577

Retrait au moulage, perpendiculaire

0.7 / *

ISO 294-4, 2577

Propriétés mécaniques

sec / cond

Unité

Norme du test

ISO Data

Module en traction

4200 / 3600

MPa

ISO 527

Contrainte d'écoulement

90 / 81

MPa

ISO 527

Déformation au seuil d'écoulement

4 / 4

ISO 527

Déformation nominale à la rupture

5 / 4

ISO 527

Résistance au choc Charpy, +23°C

64 / 49

kJ/m²

ISO 179/1eU

Type de défaillance

C / C

Résistance au choc Charpy, -30°C

80 / 55

kJ/m²

ISO 179/1eU

Type de défaillance

C / C

Résistance au choc Charpy (entaillé), +23°C

12 / 9

kJ/m²

ISO 179/1eA

Type de défaillance

C / C

Résistance au choc Charpy (entaillé), -30°C

11 / 7

kJ/m²

ISO 179/1eA

Type de défaillance

C / C

Propriétés thermiques

sec / cond

Unité

Norme du test

ISO Data

Température de fusion, 10°C/min

178 / *

°C

ISO 11357-1/-3

Température de fléchissement s/chrg, 1.80 MPa

160 / *

°C

ISO 75-1/-2

Température de fléchissement s/chrg, 0.45 MPa

175 / *

°C

ISO 75-1/-2

Température de ramolliss. Vicat, B

170 / *

°C

ISO 306

Coeffic. de dilatation therm. linéique, parallèle

80 / *

E-6/K

ISO 11359-1/-2

Inflammabilité ep. nom. 1.5 mm

HB / *

class

IEC 60695-11-10

Epaisseur de l'éprouvette

1.6 / *

Yellow Card disponible

oui / *

Yellow Card disponible

oui / *

Propriétés électriques

sec / cond

Unité

Norme du test

ISO Data

Permittivité relative, 100Hz

4 / 5.2

IEC 62631-2-1

Permittivité relative, 1MHz

3.4 / 3.3

IEC 62631-2-1

Facteur de pertes, 100Hz

380 / -

E-4

IEC 62631-2-1

Facteur de pertes, 1MHz

260 / 450

E-4

IEC 62631-2-1

Résistivité transversale

>1E13 / 1.8E12

Ohm*m

IEC 62631-3-1

Rigidité diélectrique

50 / 47

kV/mm

IEC 60243-1

Indice de résistance au cheminement

600 / -

IEC 60112

Propriétés diverses	sec / cond	Unité	Norme du test
Absorption d'eau	1.3 / *	%	Sim. to ISO 62
Absorption d'humidité	0.6 / *	%	Sim. to ISO 62
Masse volumique	1120 / -	kg/m³	ISO 1183

Fonctions

Viscosité / Vitesse de cisaillement , VESTAMID® L-GF15, PA12-GF15, Evonik

Contrainte de cisaillement / Vit. de cisaillement , VESTAMID® L-GF15, PA12-GF15, Evonik

Module de cisaillement dynamique / Température , VESTAMID® L-GF15 (sec), PA12-GF15, Evonik

Contrainte / Déformation , VESTAMID® L-GF15 (sec), PA12-GF15, Evonik

Module sécant / Déformation , VESTAMID® L-GF15 (sec), PA12-GF15, Evonik

Contrainte / Déformation (isochrone) 23°C, VESTAMID® L-GF15 (cond.), PA12-GF15, Evonik

Module de fluage / Temps 23°C, VESTAMID® L-GF15 (cond.), PA12-GF15, Evonik

Courbe de fluage 23°C, VESTAMID® L-GF15 (cond.), PA12-GF15, Evonik

Module de traction / Température , VESTAMID® L-GF15 (sec), PA12-GF15, Evonik

Caractéristiques

Transformation

Moulage par injection

Conditionnement

Granulés, Couleurs naturelles

Additifs

Lubrifiant

Propriétés spéciales

Stabilisé à la chaleur

Applications

Automobile

Disponibilité régionale

Amérique du nord, Europe, Asia Pacific, South and Central America, Proche-Orient/Afrique

Résistance Chimique

Acides
	Acide acétique (masse en 5%) (23°C)
	Acide citrique (masse en 10%) (23°C)
Bases
	Hydroxyde de soude (masse en 35%) (23°C)
	Hydroxyde de soude (masse en 1%) (23°C)
	Hydroxyde d'ammoniaque (masse en 10%) (23°C)
Alcool
	Isopropanol (23°C)
	Méthanol (23°C)
	Ethanol (23°C)
Hydrocarbures
	n-Hexane (23°C)
	Toluene (23°C)
	iso-Octane (23°C)
Cetones
	Acetone (23°C)
Ethers
	Diethyl ether (23°C)
Huiles minérales
	Huile moteur multigrade SAE 10W40 (23°C)
	Huile d'isolation (23°C)
Carburants standards
	ISO 1817 Liquide 1 (60°C)
	ISO 1817 Liquide 2 (60°C)
	ISO 1817 Liquide 3 (60°C)
	ISO 1817 Liquide 4 (60°C)
	Carburant stand. sans alcool (de pref. ISO 1817 liquide C) (23°C)
	Carburant stand. avec alcool (de pref. ISO 1817 Liquid 4) (23°C)
	Gasoil (pref. ISO 1817 liquide F) (23°C)
	Gasoil (pref. ISO 1817 liquide F) (90°C)
	Gazole EN 590 (100°C)
Selts
	Chlorure de sodium (masse en 10%) (23°C)
	Carbonate de soude (masse en 20%) (23°C)
	Carbonate de soude (masse en 2%) (23°C)
	Chlorure de zinc (masse en 50%) (23°C)
Autres
	Acétate d'éthyle (23°C)
	Peroxyde d'hydrogene (23°C)
	Liquide de frein DOT 4 (120°C)
	L'eau (23°C)

Conditions générales

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.