Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Utec® 5540 - (PE-UHMW) - Braskem

Material Data Center offers the following functions for Utec® 5540:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Utec datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Propriétés mécaniquesValeurUnitéNorme du test
ISO Data
Contrainte d'écoulement 17 MPa ISO 527
Contrainte à la rupture 30 MPa ISO 527
Déformation à la rupture 350 % ISO 527
Résistance au choc Charpy, +23°C 90 kJ/m² ISO 179/1eU
Dureté Shore D 64 - ISO 7619-1
ASTM Data
Module de traction d’élasticité 17 MPa ASTM D 638
Résistance de traction à la rupture 30 MPa ASTM D 638
Allongement à la rupture 300 % ASTM D 638
Dureté D Shore 64 - ASTM D 2240
Izod choc avec entaille, 1/8 in N J/m ASTM D 256
Propriétés thermiquesValeurUnitéNorme du test
ISO Data
Température de ramolliss. Vicat, A 128 °C ISO 306
ASTM Data
coefficient de dilatation thermique, long. 150 E-6/K ASTM D 696
DTUL à 66 psi 79 °C ASTM D 648
DTUL à 264 psi 48 °C ASTM D 648
Température de fusion 133 °C ASTM D 3418
Vicat température 128 °C ASTM D 1525
Conductivité thermique, l'état solide 0.0577 W/(m K) ASTM C 177
Propriétés électriquesValeurUnitéNorme du test
ASTM Data
Rigidité diélectrique, peu de temps 90 kV/mm ASTM D 149
Résistance de la surface 1E12 Ohm ASTM D 257
Résistance volumique 1E14 Ohm*cm ASTM D 257
Propriétés diversesValeurUnitéNorme du test
Absorption d’eau, 24hr 0.01 % ASTM D 570
Densité 925 kg/m³ ASTM D 792
Viscosité intrinsèque 24 dl/g -
Bulk Density 450 kg/m³ -
Caractéristiques
Transformation
Extrusion (autres), Moulage par compression
Propriétés spéciales
Modifié choc
Caractéristiques
Grade tribologique
Disponibilité régionale
Amérique du nord, Europe, South and Central America
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.