Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Tritan™ LX200 - Copolyester - Eastman Chemical Co.

Material Data Center offers the following functions for Tritan™ LX200:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Tritan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Propriétés mécaniques - Propriétés thermiques - Propriétés optiques - Recommandations pour la transformation Moulage par injection
Any use of this information falls under the rules of our disclaimer.
Informations produit

Eastman Tritan™ LX200 is an amorphous copolyester with excellent appearance and clarity. Its most outstanding features are excellent toughness, hydrolytic stability, and heat and chemical resistance. Eastman Tritan™ LX200 was developed for the cosmetic, fragrance, and personal care markets. Tritan™ LX200 can easily be converted into articles for application in Consumer and Personal Care markets by injection molding, extrusion blow molding, and injection blow molding.

Propriétés mécaniquesValeurUnitéNorme du test
ASTM Data
Module en traction 1585 MPa ASTM D 638
Module de traction d’élasticité 44 MPa ASTM D 638
Résistance de traction à la rupture 53 MPa ASTM D 638
Allongement d’élasticité 7 % ASTM D 638
Allongement à la rupture 140 % ASTM D 638
Module de flexion 1585 MPa ASTM D 790
Dureté Rockwell R 115 - ASTM D 785
Izod choc avec entaille, 1/8 in 650 J/m ASTM D 256
Izod choc avec entaille, bas température 126 J/m ASTM D 256
Température -40 °C -
Résistance au choc Izod, 1/8 in N J/m ASTM D 256
Propriétés thermiquesValeurUnitéNorme du test
ASTM Data
DTUL à 66 psi 109 °C ASTM D 648
DTUL à 264 psi 92 °C ASTM D 648
Propriétés optiquesValeurUnitéNorme du test
ASTM Data
Haze 1 % ASTM D 1003
Lumière á Transmittance 92 % ASTM D 1003
Recommandations pour la transformation Moulage par injectionValeurUnitéNorme du test
Pré-séchage - température 88 °C -
Pré-séchage - temps 4 - 6 h -
Température de la matière fondue 260 - 282 °C -
Température du moule 38 - 66 °C -
Caractéristiques
Transformation
Moulage par injection, Soufflage
Propriétés spéciales
Modifié choc, Stabilisé à la chaleur, Transparent
Caractéristiques
Amorphe, Copolymère
Résistance Chimique
Résistance chimique générale, Stabilité hydrolytique
Applications
Emballage
Disponibilité régionale
Amérique du nord, Europe, Asia Pacific, South and Central America, Proche-Orient/Afrique
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.