Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Tritan™ MP150 - Copolyester - Eastman Chemical Co.

Material Data Center offers the following functions for Tritan™ MP150:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Tritan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Informations produit

Eastman Tritan copolyester MP150 is a high flow grade of Eastman Tritan. Eastman Tritan copolyester MP150 has viscosity reductions of 40-50% relative to Eastman Tritan copolyester MP100. It is intended for use in extrusion coating processes or where high melt flow rate is desirable.

Other outstanding features include good toughness, hydrolytic stability, and heat and chemical resistance.

Eastman Tritan copolyester MP150 may be used in food contact applications with restrictions and is compliant with applicable and select sections of USP 35 <661>, ISO10993, and ISO11607.

Caractéristiques des transformations/physiquesValeurUnitéNorme du test
ASTM Data
Retrait au moulage , parallèle 0.006 mm/mm ASTM D 955
Propriétés mécaniquesValeurUnitéNorme du test
ASTM Data
Module en traction 1575 MPa ASTM D 638
Module de traction d’élasticité 43 MPa ASTM D 638
Résistance de traction à la rupture 52 MPa ASTM D 638
Allongement d’élasticité 7 % ASTM D 638
Allongement à la rupture 210 % ASTM D 638
Module de flexion 1575 MPa ASTM D 790
Dureté Rockwell R 111 - ASTM D 785
Izod choc avec entaille, 1/8 in 860 J/m ASTM D 256
Résistance au choc Izod, 1/8 in N J/m ASTM D 256
Propriétés thermiquesValeurUnitéNorme du test
ASTM Data
DTUL à 66 psi 94 °C ASTM D 648
DTUL à 264 psi 81 °C ASTM D 648
Température de transition vitreuse 110 °C ASTM E 1356
Propriétés optiquesValeurUnitéNorme du test
ASTM Data
Haze 1 % ASTM D 1003
Lumière á Transmittance 91 % ASTM D 1003
Propriétés diversesValeurUnitéNorme du test
Densité 1180 kg/m³ ASTM D 792
Propriétés mécaniques (Grades film)ValeurUnitéNorme du test
ASTM Data
Module en traction, long. 979 MPa ASTM D 882
Résistance de traction à la rupture, long. 56.5 MPa ASTM D 882
Allongement à la rupture, long. 217 % ASTM D 882
Epaisseur des eprouvettes 0.127 mm -
Recommandations pour la transformation ExtrusionValeurUnitéNorme du test
Pré-séchage - température 88 °C -
Pré-séchage - temps 4 - 6 h -
Température de la matière fondue 260 - 282 °C -
Température du moule 38 - 66 °C -
Caractéristiques
Transformation
Enduction, Thermoformage
Propriétés spéciales
Stabilisé à la chaleur, Transparent
Caractéristiques
Copolymère
Résistance Chimique
Résistance chimique générale, Stabilité hydrolytique
Certifications
Contact alimentaire, Grade médical, Biocompatibility ISO 10993, USP Class VI approbation
Applications
Médical, Emballage
Disponibilité régionale
Amérique du nord, Europe, Asia Pacific, South and Central America
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.