Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Teflon™ PFA 945HP Plus - PFA - The Chemours Company

Material Data Center offers the following functions for Teflon™ PFA 945HP Plus:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Teflon datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés électriques - Propriétés diverses
Any use of this information falls under the rules of our disclaimer.
Caractéristiques des transformations/physiquesValeurUnitéNorme du test
Other Standards[S]
Indice de fluidité, MFI 7 g/10min ASTM D 3307
S: These properties are reported by the producer according standards that are different to our defaults.
Propriétés mécaniquesValeurUnitéNorme du test
ASTM Data
Module de flexion 600 MPa ASTM D 790
Dureté D Shore 55 - ASTM D 2240
Other Standards[S]
Module de traction 28 MPa ASTM D 3307
Allongement à la rupture 290 % ASTM D 3307
S: These properties are reported by the producer according standards that are different to our defaults.
Propriétés thermiquesValeurUnitéNorme du test
ASTM Data
UL 94 inflammabilité V-0 - UL 94
Indice limite d’oxygène 95 % ASTM D 2863
Other Standards[S]
Température de fusion 290 °C ASTM D 4591
S: These properties are reported by the producer according standards that are different to our defaults.
Propriétés électriquesValeurUnitéNorme du test
ASTM Data
Rigidité diélectrique, peu de temps 80 kV/mm ASTM D 149
Facteur de dissipation diélectrique, 1 MHz 0.0002 - ASTM D 150
Constante diélectrique, 1 MHz 2.03 - ASTM D 150
Résistance volumique 1E18 Ohm*cm ASTM D 257
Propriétés diversesValeurUnitéNorme du test
Absorption d’eau, 24hr 0.03 % ASTM D 570
Densité 2150 kg/m³ ASTM D 792
Caractéristiques
Transformation
Moulage par injection, Extrusion de tubes, Extrusion (autres), Moulage par transfert, Moulage par compression
Conditionnement
Granulés
Propriétés spéciales
Stabilisé aux intempéries, Stabilisé à la chaleur
Caractéristiques
Bon tirage, Bas fumée, Tenue de la matière à l’état fondu, Stabilité thermique, Grade tribologique
Résistance Chimique
Résistance chimique générale, Fissuration à l’environnement
Certifications
Contact alimentaire, FDA 21 CFR approbation
Disponibilité régionale
Amérique du nord, Europe, Asia Pacific, South and Central America
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.