Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of STYRON™ 685P - PS - Americas Styrenics LLC

Material Data Center offers the following functions for STYRON™ 685P:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Styron datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés diverses - Recommandations pour la transformation Moulage par injection - Recommandations pour la transformation Extrusion
Any use of this information falls under the rules of our disclaimer.
Caractéristiques des transformations/physiquesValeurUnitéNorme du test
ASTM Data
Indice de fluidité, MFI 2.2 g/10min ASTM D 1238
Température 200 °C -
Charge 5 kg -
Retrait au moulage , parallèle 0.006 mm/mm ASTM D 955
Propriétés mécaniquesValeurUnitéNorme du test
ASTM Data
Module en traction 3172 MPa ASTM D 638
Module de traction 52.4 MPa ASTM D 638
Résistance de traction à la rupture 51 MPa ASTM D 638
Allongement à la rupture 2.2 % ASTM D 638
Module de flexion 3241 MPa ASTM D 790
Résistance à la flexion 89.6 MPa ASTM D 790
Dureté Rockwell L107 - ASTM D 785
Izod choc avec entaille, 1/8 in 21.4 J/m ASTM D 256
Propriétés thermiquesValeurUnitéNorme du test
ASTM Data
coefficient de dilatation thermique, long. 90 E-6/K ASTM D 696
DTUL à 66 psi 97.8 °C ASTM D 648
DTUL à 264 psi 88.9 °C ASTM D 648
Vicat température 108 °C ASTM D 1525
Propriétés diversesValeurUnitéNorme du test
Densité 1040 kg/m³ ASTM D 792
Recommandations pour la transformation Moulage par injectionValeurUnitéNorme du test
Température du moule 17 - 65 °C -
Zone 1 229 - 243 °C -
Zone 2 216 - 243 °C -
Zone 3 199 - 216 °C -
Température de la buse 229 - 243 °C -
Contre-pression 0.172 - 1.48 MPa -
Recommandations pour la transformation ExtrusionValeurUnitéNorme du test
Température de la matière fondue 193 - 232 °C -
Zone 1 177 - 193 °C -
Zone 2 182 - 204 °C -
Zone 3 188 - 210 °C -
Zone 4 199 - 216 °C -
Zone 5 204 - 221 °C -
Température de la buse 199 - 232 °C -
Caractéristiques
Transformation
Moulage par injection, Extrusion (autres)
Propriétés spéciales
Stabilisé à la chaleur
Certifications
Contact alimentaire, FDA 21 CFR approbation, Grade médical, USP Class VI approbation
Applications
Électrotechnique et électrique, Médical, Emballage
Disponibilité régionale
Amérique du nord
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.