Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Pyramid™ KD4219 - PEEK-CF - Polymics, Ltd.

Material Data Center offers the following functions for Pyramid™ KD4219:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Pyramid datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Propriétés mécaniques - Propriétés thermiques - Propriétés électriques - Propriétés diverses
Any use of this information falls under the rules of our disclaimer.
Propriétés mécaniquesValeurUnitéNorme du test
ASTM Data
Module en traction 12400 MPa ASTM D 638
Résistance de traction à la rupture 172 MPa ASTM D 638
Allongement à la rupture 2 % ASTM D 638
Résistance de compression 220 MPa ASTM D 695
Module de flexion 12400 MPa ASTM D 790
Résistance à la flexion 248 MPa ASTM D 790
Dureté Rockwell M 90 - ASTM D 785
Dureté D Shore 83 - ASTM D 2240
Izod choc avec entaille, 1/8 in 53 J/m ASTM D 256
Résistance au choc Izod, 1/8 in 670 J/m ASTM D 256
Propriétés thermiquesValeurUnitéNorme du test
ASTM Data
UL 94 inflammabilité V-0 - UL 94
Épaisseur testée 3.2 mm -
coefficient de dilatation thermique, long. 45 E-6/K ASTM D 696
DTUL à 264 psi 260 °C ASTM D 648
Température de fusion 360 °C ASTM D 3418
Température de transition vitreuse 160 °C ASTM E 1356
Conductivité thermique, l'état solide 0.036 W/(m K) ASTM C 177
Propriétés électriquesValeurUnitéNorme du test
ASTM Data
Résistance de la surface 1E8 Ohm ASTM D 257
Propriétés diversesValeurUnitéNorme du test
Absorption d’eau, 24hr 0.04 % ASTM D 570
Densité 1460 kg/m³ ASTM D 792
Caractéristiques
Transformation
Moulage par injection, Extrusion (autres)
Conditionnement
Granulés, Noir, Produit semi-fini
Additifs
Lubrifiant
Propriétés spéciales
Stérilisation à la vapeur
Caractéristiques
Grade tribologique
Résistance Chimique
Résistance chimique générale
Disponibilité régionale
Amérique du nord, Europe, Asia Pacific
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.