Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Prisma® 3410 - PP - Braskem

Material Data Center offers the following functions for Prisma® 3410:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Prisma datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés optiques - Propriétés diverses
Any use of this information falls under the rules of our disclaimer.
Caractéristiques des transformations/physiquesValeurUnitéNorme du test
ISO Data
Indice de fluidité, MFI 10 g/10min ISO 1133
Température 230 °C -
Charge 2.16 kg -
ASTM Data
Indice de fluidité, MFI 10 g/10min ASTM D 1238
Température 230 °C -
Charge 2.16 kg -
Propriétés mécaniquesValeurUnitéNorme du test
ISO Data
Contrainte d'écoulement 29 MPa ISO 527
Déformation au seuil d'écoulement 13 % ISO 527
Module de flexion, 23°C 1050 MPa ISO 178
Résistance au choc Izod avec entaille, +23°C 3.5 kJ/m² ISO 180/1A
Résistance au choc Izod avec entaille 1.3 kJ/m² ISO 180/1A
Température -20 °C -
Dureté Rockwell R 82 - ISO 2039-2
ASTM Data
Module de traction d’élasticité 30 MPa ASTM D 638
Allongement d’élasticité 13 % ASTM D 638
Dureté Rockwell R 83 - ASTM D 785
Izod choc avec entaille, 1/8 in 45 J/m ASTM D 256
Izod choc avec entaille, bas température 20 J/m ASTM D 256
Température -20 °C -
Propriétés thermiquesValeurUnitéNorme du test
ISO Data
Température de fléchissement s/chrg, 1.80 MPa 51 °C ISO 75-1/-2
Température de fléchissement s/chrg, 0.45 MPa 85 °C ISO 75-1/-2
Température de ramolliss. Vicat, A 129 °C ISO 306
ASTM Data
DTUL à 66 psi 80 °C ASTM D 648
DTUL à 264 psi 51 °C ASTM D 648
Vicat température 129 °C ASTM D 1525
Propriétés optiquesValeurUnitéNorme du test
ASTM Data
Haze 9 % ASTM D 1003
Propriétés diversesValeurUnitéNorme du test
Densité 902 kg/m³ ASTM D 792
Caractéristiques
Transformation
Moulage par injection
Propriétés spéciales
Transparent
Caractéristiques
Copolymère, Aléatoire copolymère
Disponibilité régionale
Amérique du nord, Europe, South and Central America
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.