Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LUVOCOM 80/CF/12/TF/10/BK 100 - (POM+PTFE)-CF - LEHVOSS Group

Material Data Center offers the following functions for LUVOCOM 80/CF/12/TF/10/BK 100:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Luvocom datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés électriques - Propriétés diverses - Recommandations pour la transformation Moulage par injection
Any use of this information falls under the rules of our disclaimer.
Caractéristiques des transformations/physiquesValeurUnitéNorme du test
ISO Data
Indice de fluidité à chaud en volume, MVR 12 cm³/10min ISO 1133
Température 190 °C -
Charge 5 kg -
Retrait au moulage, parallèle 0.5 % ISO 294-4, 2577
Conductivité thermique du fondu 0.4 W/(m K) -
Propriétés mécaniquesValeurUnitéNorme du test
ISO Data
Module en traction 11000 MPa ISO 527
Résistance à la traction 95 MPa ISO 527
Module de flexion, 23°C 8500 MPa ISO 178
Résistance au choc Charpy, +23°C 18 kJ/m² ISO 179/1eU
Propriétés thermiquesValeurUnitéNorme du test
ISO Data
Température de fléchissement s/chrg, 1.80 MPa 130 °C ISO 75-1/-2
Température de ramolliss. Vicat, A 160 °C ISO 306
Coeffic. de dilatation therm. linéique, parallèle 60 E-6/K ISO 11359-1/-2
Propriétés électriquesValeurUnitéNorme du test
ISO Data
Résistivité superficielle 10000 Ohm IEC 62631-3-2
Propriétés diversesValeurUnitéNorme du test
Masse volumique 1500 kg/m³ ISO 1183
Recommandations pour la transformation Moulage par injectionValeurUnitéNorme du test
Pré-séchage - température 75 °C -
Pré-séchage - temps 2 - 8 h -
Température de la matière fondue 200 °C -
Température du moule 80 - 120 °C -
Zone 1 175 - 190 °C -
Zone 2 185 - 205 °C -
Zone 3 180 - 200 °C -
Température de la buse 175 - 200 °C -
Caractéristiques
Transformation
Moulage par injection
Conditionnement
Noir
Additifs
Lubrifiant
Propriétés spéciales
Conductivité électrique accrue, Antistatique
Caractéristiques
Grade tribologique
Applications
Automobile, IT / Machine de bureau
Disponibilité régionale
Amérique du nord, Europe, Asia Pacific
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.