Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LUPOY ER5001RFZ - (PC+ABS) - LG Chem

Material Data Center offers the following functions for LUPOY ER5001RFZ:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Lupoy datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Caractéristiques des transformations/physiquesValeurUnitéNorme du test
ASTM Data
Indice de fluidité, MFI 20 g/10min ASTM D 1238
Température 250 °C -
Charge 2.16 kg -
Retrait au moulage , parallèle 0.006 mm/mm ASTM D 955
Propriétés mécaniquesValeurUnitéNorme du test
ASTM Data
Module de traction d’élasticité 58.9 MPa ASTM D 638
Allongement à la rupture 65 % ASTM D 638
Module de flexion 2453 MPa ASTM D 790
Résistance à la flexion 93.2 MPa ASTM D 790
Izod choc avec entaille, 1/8 in 441 J/m ASTM D 256
Propriétés thermiquesValeurUnitéNorme du test
ISO Data
Inflammabilité ep. nom. 1.5 mm V-0 class IEC 60695-11-10
Epaisseur de l'éprouvette 1.5 mm -
Inflammabilité 5V pr. épaisseur h 5VB class IEC 60695-11-20
Epaisseur de l'éprouvette 1.5 mm -
ASTM Data
UL 94 inflammabilité V-0 - UL 94
Épaisseur testée 1.2 mm -
DTUL à 66 psi 87[1] °C ASTM D 648
1: 6.4 mm
Propriétés diversesValeurUnitéNorme du test
Densité 1180 kg/m³ ASTM D 792
Recommandations pour la transformation Moulage par injectionValeurUnitéNorme du test
Pré-séchage - température 75 - 85 °C -
Pré-séchage - temps 4 - 5 h -
L'humidité de traitement ≤0.02 % -
Température de la matière fondue 235 - 265 °C -
Température du moule 50 - 80 °C -
Zone 1 230 - 265 °C -
Zone 2 235 - 270 °C -
Zone 3 240 - 280 °C -
Température de la buse 240 - 280 °C -
Vitesse de rotation de vis 40 - 70 rpm -
Contre-pression 1 - 4 MPa -
Caractéristiques
Transformation
Moulage par injection
Propriétés spéciales
Ignifugé, Sans halogène
Certifications
Résine de contenu recyclé
Applications
IT / Machine de bureau
Disponibilité régionale
Amérique du nord, Europe, Asia Pacific, South and Central America
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.