Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LEXAN™ Copolymer ML7664 - Asia - PC - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for LEXAN™ Copolymer ML7664 - Asia:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Lexan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés diverses
Any use of this information falls under the rules of our disclaimer.
Informations produit
LEXAN ML7664 polycarbonate (PC) siloxane resin, is a product targeting (profile) extrusion applications requiring extreme low temperature ductility. LEXAN ML7664 resin is a non-FR product available in opaque colors only.
Caractéristiques des transformations/physiquesValeurUnitéNorme du test
ISO Data
Indice de fluidité à chaud en volume, MVR 2 cm³/10min ISO 1133
Température 300 °C -
Charge 1.2 kg -
ASTM Data
Indice de fluidité, MFI 2.7 g/10min ASTM D 1238
Température 300 °C -
Charge 1.2 kg -
Propriétés mécaniquesValeurUnitéNorme du test
ISO Data
Module en traction 2300 MPa ISO 527
Contrainte d'écoulement 59 MPa ISO 527
Déformation au seuil d'écoulement 6 % ISO 527
Contrainte à la rupture 59 MPa ISO 527
Déformation à la rupture 50 % ISO 527
Module de flexion 2100 MPa ISO 178
Résistance au choc Charpy (entaillé), +23°C 77 kJ/m² ISO 179/1eA
Résistance au choc Izod (entaillé), +23°C, 4mm 64 kJ/m² ISO 180/1A
Résistance au choc Izod (entaillé), -30°C, 4mm 54 kJ/m² ISO 180/1A
ASTM Data
Module en traction 2200 MPa ASTM D 638
Module de traction d’élasticité 60 MPa ASTM D 638
Résistance de traction à la rupture 56 MPa ASTM D 638
Allongement d’élasticité 6 % ASTM D 638
Allongement à la rupture 86 % ASTM D 638
Module de flexion 2300 MPa ASTM D 790
Izod choc avec entaille, 1/8 in 847 J/m ASTM D 256
Izod choc avec entaille, bas température 710 J/m ASTM D 256
Température -30 °C -
Propriétés thermiquesValeurUnitéNorme du test
ISO Data
Température de fléchissement s/chrg, 1.80 MPa 125 °C ISO 75-1/-2
Température de ramolliss. Vicat, B 143 °C ISO 306
Température de ramolliss. Vicat, 120°C/h 50N 145 °C ISO 306
ASTM Data
DTUL à 264 psi 127 °C ASTM D 648
Vicat température 144 °C ASTM D 1525
Propriétés diversesValeurUnitéNorme du test
Absorption d'eau 0.35 % Sim. to ISO 62
Absorption d'humidité 0.15 % Sim. to ISO 62
Masse volumique 1190 kg/m³ ISO 1183
Densité 1190 kg/m³ ASTM D 792
Caractéristiques
Transformation
Extrusion de profilés
Disponibilité régionale
Asia Pacific
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.