Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Halene - H P5300 - (PE-HD) - Haldia Petrochemicals

Material Data Center offers the following functions for Halene - H P5300:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Halene datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés diverses - Recommandations pour la transformation Extrusion
Any use of this information falls under the rules of our disclaimer.
Informations produit
P5300 is a pipe grade HDPE, produced by the Mitsui CX Process.

P5300 combines exceptional processability with high creep resistance, high ESCR and excellent mechanical properties.

P5300 has MRS 11.2 MPa according to ISO 9080 and is designated PE 112 according to ISO 12162.
Caractéristiques des transformations/physiquesValeurUnitéNorme du test
ASTM Data
Indice de fluidité, MFI 0.25 g/10min ASTM D 1238
Température 190 °C -
Charge 5 kg -
Propriétés mécaniquesValeurUnitéNorme du test
ASTM Data
Module de traction d’élasticité 26 MPa ASTM D 638
Résistance de traction à la rupture 40 MPa ASTM D 638
Allongement d’élasticité 11 % ASTM D 638
Allongement à la rupture 800 % ASTM D 638
Module de flexion 1100 MPa ASTM D 790
Dureté D Shore 65 - ASTM D 2240
Izod choc avec entaille, 1/8 in 270 J/m ASTM D 256
Propriétés thermiquesValeurUnitéNorme du test
ASTM Data
DTUL à 66 psi 70 °C ASTM D 648
Température de fusion 131 °C ASTM D 3418
Vicat température 125 °C ASTM D 1525
Propriétés diversesValeurUnitéNorme du test
Densité 950 kg/m³ ASTM D 792
Recommandations pour la transformation ExtrusionValeurUnitéNorme du test
Pré-séchage - température 90 °C -
Pré-séchage - temps 2 h -
Zone 1 160 - 220 °C -
Température de la buse 180 - 220 °C -
Caractéristiques
Transformation
Extrusion de tubes
Caractéristiques
Résistance au fluage
Résistance Chimique
Fissuration à l’environnement
Disponibilité régionale
Asia Pacific
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.