Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Halene - H HD T10 - (PE-HD) - Haldia Petrochemicals

Material Data Center offers the following functions for Halene - H HD T10:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Halene datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés diverses - Recommandations pour la transformation Extrusion
Any use of this information falls under the rules of our disclaimer.
Informations produit
HD T10 is a HDPE monofilament grade produced by the Spherilene Technology.

This grade can be used in monofilament for Fabrics, Nets, Twines & Ropes.

HD T10 is characterized by excellent processability and mechanical strength.
Caractéristiques des transformations/physiquesValeurUnitéNorme du test
ASTM Data
Indice de fluidité, MFI 1.1 g/10min ASTM D 1238
Température 190 °C -
Charge 2.16 kg -
Propriétés mécaniquesValeurUnitéNorme du test
ASTM Data
Module de traction d’élasticité 26 MPa ASTM D 638
Résistance de traction à la rupture 38 MPa ASTM D 638
Allongement à la rupture 1100 % ASTM D 638
Module de flexion 1000 MPa ASTM D 790
Dureté D Shore 61 - ASTM D 2240
Izod choc avec entaille, 1/8 in 400 J/m ASTM D 256
Propriétés thermiquesValeurUnitéNorme du test
ASTM Data
Température de fusion 133 °C ASTM D 3418
Vicat température 127 °C ASTM D 1525
Propriétés diversesValeurUnitéNorme du test
Densité 950 kg/m³ ASTM D 792
Recommandations pour la transformation ExtrusionValeurUnitéNorme du test
Zone 1 200 - 240 °C -
Température de la buse 230 - 250 °C -
Caractéristiques
Transformation
Extrusion (autres)
Applications
Monofilament
Disponibilité régionale
Asia Pacific
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.