Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Fibrolon® P 7550 - PP-NF... - FKuR Kunststoff GmbH

Material Data Center offers the following functions for Fibrolon® P 7550:
unit conversion, PDF datasheet print, comparison with other plastics, application examples, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Fibrolon datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Informations produit
Natural fiber reinforced compound for injection moulding.
Caractéristiques des transformations/physiquesValeurUnitéNorme du test
ISO Data
Indice de fluidité, MFI 11.5 g/10min ISO 1133
Température 230 °C -
Charge 5 kg -
Propriétés mécaniquesValeurUnitéNorme du test
ISO Data
Module en traction 3250 MPa ISO 527
Résistance à la traction 22 MPa ISO 527
Déformation au seuil d'écoulement 3 % ISO 527
Contrainte à la rupture 22 MPa ISO 527
Déformation à la rupture 3 % ISO 527
Module de flexion, 23°C 3550 MPa ISO 178
Résistance au choc Charpy, +23°C 7.9 kJ/m² ISO 179/1eU
Résistance au choc Charpy (entaillé), +23°C 3.3 kJ/m² ISO 179/1eA
Propriétés thermiquesValeurUnitéNorme du test
ISO Data
Température de fusion, 10°C/min 165 °C ISO 11357-1/-3
Température de ramolliss. Vicat, A 139 °C ISO 306
Propriétés diversesValeurUnitéNorme du test
Masse volumique 1030 kg/m³ ISO 1183
Recommandations pour la transformation Moulage par injectionValeurUnitéNorme du test
Pré-séchage - température 80 °C -
Pré-séchage - temps 2 - 4 h -
Température du moule 30 - 50 °C -
Zone 1 150 °C -
Zone 2 170 °C -
Zone 3 190 °C -
Température de la buse 200 °C -
Pressions d'injection 200 MPa -
Caractéristiques
Transformation
Moulage par injection
Conditionnement
Granulés, Marron
Certifications
Contient des ressources renouvelables
Applications
Jouets
Disponibilité régionale
Amérique du nord, Europe, Asia Pacific, South and Central America, Proche-Orient/Afrique
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.