Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of COOLPOLY® D5120 - PPS - Celanese

Check here, which other CoolPoly datasheets, application examples or technical articles are available in Material Data Center

Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés diverses - Fonctions

Any use of this information falls under the rules of our disclaimer.

Informations produit

CoolPoly D series of thermally conductive plastics transfers heat, a characteristic previously unavailable in injection molding grade polymers. CoolPoly is lightweight, netshape moldable and allows design freedom in applications previously restricted to metals. The D series is electrically non-conductive and can be used for its dielectric properties.

Flammability @1.6mm nom. thickn.

V-0

-

Caractéristiques des transformations/physiques	Valeur	Unité	Norme du test
ISO Data
Retrait au moulage, parallèle	0.2	%	ISO 294-4, 2577
Retrait au moulage, perpendiculaire	0.5	%	ISO 294-4, 2577

Propriétés mécaniques	Valeur	Unité	Norme du test
ISO Data
Module en traction	16000	MPa	ISO 527
Contrainte à la rupture	125	MPa	ISO 527
Déformation à la rupture	0.8	%	ISO 527
Résistance au choc Charpy, +23°C	13	kJ/m²	ISO 179/1eU
Résistance au choc Charpy (entaillé), +23°C	3.5	kJ/m²	ISO 179/1eA

Propriétés thermiques	Valeur	Unité	Norme du test
ISO Data
Température de fléchissement s/chrg, 1.80 MPa	260	°C	ISO 75-1/-2
Température de fléchissement s/chrg, 0.45 MPa	280	°C	ISO 75-1/-2
Inflammabilité ep. nom. 1.5 mm	V-0	class	IEC 60695-11-10
Epaisseur de l'éprouvette	1.5	mm	-

Propriétés diverses	Valeur	Unité	Norme du test
Masse volumique	2000	kg/m³	ISO 1183

Fonctions

Caractéristiques

Transformation

Moulage par injection

Propriétés spéciales

Thermoconducteur

Applications

Électrotechnique et électrique

Conditions générales

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.