Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of CALIBRE™ 301-EP-37 - PC - Trinseo

Material Data Center offers the following functions for CALIBRE™ 301-EP-37:
unit conversion, PDF datasheet print

Check here, which other Calibre datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés diverses
Any use of this information falls under the rules of our disclaimer.
Caractéristiques des transformations/physiquesValeurUnitéNorme du test
ISO Data
Indice de fluidité, MFI 37 g/10min ISO 1133
Température 300 °C -
Charge 1.2 kg -
ASTM Data
Indice de fluidité, MFI 37 g/10min ASTM D 1238
Température 300 °C -
Charge 1.2 kg -
Retrait au moulage , parallèle 0.007 mm/mm ASTM D 955
Propriétés mécaniquesValeurUnitéNorme du test
ASTM Data
Module en traction 2413 MPa ASTM D 638
Module de traction d’élasticité 58.6 MPa ASTM D 638
Allongement d’élasticité 5.5 % ASTM D 638
Allongement à la rupture 85 % ASTM D 638
Module de flexion 2372 MPa ASTM D 790
Résistance à la flexion 90.3 MPa ASTM D 790
Dureté Rockwell R121 - ASTM D 785
Izod choc avec entaille, 1/8 in 534 J/m ASTM D 256
Izod choc avec entaille, bas température 443 J/m ASTM D 256
Température -40 °C -
Propriétés thermiquesValeurUnitéNorme du test
ISO Data
Coeffic. de dilatation therm. linéique, parallèle 72 E-6/K ISO 11359-1/-2
Inflammabilité ep. nom. 1.5 mm V-2 class IEC 60695-11-10
Epaisseur de l'éprouvette 1.5 mm -
Inflammabilité pr. épaisseur h V-2 class IEC 60695-11-10
Epaisseur de l'éprouvette 3.0 mm -
ASTM Data
UL 94 inflammabilité V-2 - UL 94
Épaisseur testée 1.5 mm -
coefficient de dilatation thermique, long. 72 E-6/K ASTM D 696
DTUL à 264 psi 122 °C ASTM D 648
Propriétés diversesValeurUnitéNorme du test
Absorption d'humidité 0.15 % Sim. to ISO 62
Masse volumique 1180 kg/m³ ISO 1183
Absorption d’eau, 24hr 0.15 % ASTM D 570
Densité 1180 kg/m³ ASTM D 792
Caractéristiques
Transformation
Moulage par injection
Additifs
Agent de démoulage
Disponibilité régionale
Amérique du nord
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.