Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Bormed™ RG835MO - PP - Borealis A/S

Material Data Center offers the following functions for Bormed™ RG835MO:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Bormed datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Recommandations pour la transformation Moulage par injection
Any use of this information falls under the rules of our disclaimer.
Caractéristiques des transformations/physiquesValeurUnitéNorme du test
ISO Data
Indice de fluidité, MFI 30 g/10min ISO 1133
Température 230 °C -
Charge 2.16 kg -
Propriétés mécaniquesValeurUnitéNorme du test
ISO Data
Module en traction 1200 MPa ISO 527
Contrainte d'écoulement 27.5 MPa ISO 527
Déformation au seuil d'écoulement 12 % ISO 527
Module de flexion, 23°C 1200 MPa ISO 178
Résistance au choc Charpy (entaillé), +23°C 5 kJ/m² ISO 179/1eA
Propriétés thermiquesValeurUnitéNorme du test
ISO Data
Température de fusion, 10°C/min 150 °C ISO 11357-1/-3
Température de fléchissement s/chrg, 0.45 MPa 75 °C ISO 75-1/-2
Recommandations pour la transformation Moulage par injectionValeurUnitéNorme du test
Température de la matière fondue 220 - 250 °C -
Température du moule 30 - 40 °C -
Pression de maintien 20 - 50 MPa -
Caractéristiques
Transformation
Moulage par injection
Additifs
Agent antiadhérent
Propriétés spéciales
Transparent, Stérilisable, Stérilisation par oxyde d'éthylène (EtO), Stérilisation à la vapeur
Caractéristiques
High Gloss, Grade tribologique, Copolymère, Aléatoire copolymère
Certifications
Contact alimentaire, FDA 21 CFR approbation, Grade médical, Device Master File
Applications
Médical, Emballage
Disponibilité régionale
Amérique du nord, Europe, Asia Pacific, South and Central America, Proche-Orient/Afrique
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.