Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of BESTNYL SI30VI02BHF - PA6-(GF+GX)30 - Grupo Triesa

Material Data Center offers the following functions for BESTNYL SI30VI02BHF:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Bestnyl datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Propriétés mécaniquessec / condUnitéNorme du test
ISO Data
Module en traction 7500 / 4800 MPa ISO 527
Résistance à la traction 135 / 90 MPa ISO 527
Déformation à la rupture 3 / 5 % ISO 527
Résistance au choc Charpy, +23°C 45 / 60 kJ/m² ISO 179/1eU
Résistance au choc Charpy (entaillé), +23°C 6 / 10 kJ/m² ISO 179/1eA
Propriétés thermiquessec / condUnitéNorme du test
ISO Data
Température de fléchissement s/chrg, 1.80 MPa 190 / * °C ISO 75-1/-2
Température de fléchissement s/chrg, 0.45 MPa 210 / * °C ISO 75-1/-2
Inflammabilité pr. épaisseur h HB / * class IEC 60695-11-10
Propriétés électriquessec / condUnitéNorme du test
ISO Data
Résistivité superficielle * / 1E12 Ohm IEC 62631-3-2
Rigidité diélectrique 40 / - kV/mm IEC 60243-1
Propriétés diversessec / condUnitéNorme du test
Absorption d'eau 0.95 / * % Sim. to ISO 62
Masse volumique 1360 / - kg/m³ ISO 1183
Caractéristiques
Transformation
Moulage par injection
Conditionnement
Granulés, Noir
Additifs
Lubrifiant
Propriétés spéciales
Stabilisé à la chaleur
Caractéristiques
Soudable
Disponibilité régionale
Europe
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.