Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Menzolit® BMC 3100 - UP-(MD+GF)77 - Menzolit

Material Data Center offers the following functions for Menzolit® BMC 3100:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other BMC datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés électriques - Propriétés diverses
Any use of this information falls under the rules of our disclaimer.
Caractéristiques des transformations/physiquesValeurUnitéNorme du test
ISO Data
Conductivité thermique du fondu 0.7 W/(m K) -
Chaleur spécifique du fondu 1100 J/(kg K) -
Propriétés mécaniquesValeurUnitéNorme du test
ISO Data
Module en traction 14000 MPa ISO 527
Résistance à la traction 25 MPa ISO 527
Module de flexion, 23°C 12000 MPa ISO 178
Propriétés thermiquesValeurUnitéNorme du test
ISO Data
Température de transition vitreuse, 10°C/min 185 °C ISO 11357-1/-2
Coeffic. de dilatation therm. linéique, perpend. 10 E-6/K ISO 11359-1/-2
Inflammabilité pr. épaisseur h HB class IEC 60695-11-10
Epaisseur de l'éprouvette 2.0 mm -
Aptitude à l'allumage 22 % ISO 4589-1/-2
Propriétés électriquesValeurUnitéNorme du test
ISO Data
Résistivité transversale 1E13 Ohm*m IEC 62631-3-1
Résistivité superficielle 1E12 Ohm IEC 62631-3-2
Rigidité diélectrique 30 kV/mm IEC 60243-1
Indice de résistance au cheminement 600 - IEC 60112
Propriétés diversesValeurUnitéNorme du test
Absorption d'eau 0.5 % Sim. to ISO 62
Masse volumique 2000 kg/m³ ISO 1183
Caractéristiques
Transformation
Moulage par injection
Conditionnement
Moulage en vrac
Propriétés spéciales
Stabilisé à la chaleur
Applications
Automobile
Disponibilité régionale
Amérique du nord, Europe, Asia Pacific, South and Central America, Proche-Orient/Afrique
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.