Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Versaflex™ HC 2110-35N EU - TPE - Avient Corporation

Material Data Center offers the following functions for Versaflex™ HC 2110-35N EU:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Versaflex datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Propiedades mecánicas - Otras propiedades - Recomendación para procesamiento Moldeo por inyección
Any use of this information falls under the rules of our disclaimer.
Propiedades mecánicasValorUnidadesMétodo de ensayo
ISO Data
Alargamiento a rotura 640 % ISO 37
Deformación permanente por compresión a 23°C, 24h 23 % ISO 815
Deformación permanente por compresión a 70°C, 24h 35 % ISO 815
Deformación permanente por compresión a 100°C, 24h 54 % ISO 815
Dureza Shore A 35 - ISO 7619-1
Otras propiedadesValorUnidadesMétodo de ensayo
Densidad 902 kg/m³ ISO 1183
Recomendación para procesamiento Moldeo por inyecciónValorUnidadesMétodo de ensayo
Temperatura de la masa 232 - 249 °C -
Temperatura del molde 15.6 - 32.2 °C -
Zona 1 182 - 193 °C -
Zona 2 221 - 238 °C -
Zona 3 238 - 249 °C -
Temperatura de boquilla 238 - 249 °C -
Velocidad de giro de husillo 80 - 200 rpm -
Velocidad de inyección 25.4 - 76.2 mm/s -
Contrapresión 0 - 0.552 MPa -
Características
Procesamiento y forma de entrega
Moldeo por inyección
Forma de suministro
Sémola, Color natural
Aditivos
Desmoldeante
Certifications
USP Class VI
Applicaciones
Médico
Disponibilidad regional
Norteamérica, Europa, Asia Pacifico, América del Sur y Centroaméric, Próximo Oriente/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.