Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Topolymer® 5221-931B - TPE - Top Polymer Enterprise

Material Data Center offers the following functions for Topolymer® 5221-931B:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Topolymer datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Propiedades mecánicasValorUnidadesMétodo de ensayo
ASTM Data
Módulo en 100% alargamiento 9.5 MPa ASTM D 412
Dureza A Shore 93 - ASTM D 2240
Resistencia al desgarro 9 kN/m ASTM D 624
Esfuerzo de fractura a tracción 14 MPa ASTM D 412
Alargamiento a la rotura 350 % ASTM D 412
Otras propiedadesValorUnidadesMétodo de ensayo
Densidad 1060 kg/m³ ASTM D 792
Recomendación para procesamiento ExtrusiónValorUnidadesMétodo de ensayo
Type of extrusion wire/cable - -
Temperatura de pre-secado 100 °C -
Tiempo de pre-secado 2 - 3 h -
Temperatura de la masa 190 - 210 °C -
Zona 1 160 - 200 °C -
Zona 2 190 - 210 °C -
Zona 3 190 - 210 °C -
Características
Procesamiento y forma de entrega
Otros tipos de extrusión
Forma de suministro
Sémola, Negro
Características especiales
Resistencia mejorada al fuego, Sin halógeno, Estable contra rayos U.V./interperie, Estable contra el calor
Características
Copolímero
Applicaciones
Electrica
Disponibilidad regional
Asia Pacifico
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.