View Datasheet in other language

E-mail to a friend

Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Tarnamid® T-27 MHLS - PA6 - Grupa Azoty S.A.

Material Data Center offers the following functions for Tarnamid® T-27 MHLS:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Tarnamid datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:

Caracteristicas de procesamiento y fisicas - Propiedades mecánicas - Propiedades térmicas - Propiedades eléctricas - Otras propiedades

Any use of this information falls under the rules of our disclaimer.

Caracteristicas de procesamiento y fisicas

Seco / Cond

Unidades

Método de ensayo

ISO Data

Indice de fluidez volumétrico, MVR

100 / *

cm³/10min

ISO 1133

Temperatura

275 / *

°C

Carga

5 / *

Contracción posterior al moldeo, paralelo

1.6 / *

ISO 294-4, 2577

Contracción posterior al moldeo, normal

1.8 / *

ISO 294-4, 2577

Propiedades mecánicas

Seco / Cond

Unidades

Método de ensayo

ISO Data

Ball indentation hardness

150 / 75

MPa

ISO 2039-1

Propiedades térmicas

Seco / Cond

Unidades

Método de ensayo

ISO Data

Temperatura de fusión, 10°C/min

221 / *

°C

ISO 11357-1/-3

Estabilidad al calor, 1.80 MPa

60 / *

°C

ISO 75-1/-2

Temp. reblandecimiento Vicat, B

195 / *

°C

ISO 306

Coef.de expansión térmica lineal, paralelo

90 / *

E-6/K

ISO 11359-1/-2

Coef.de expansión térmica lineal, normal

120 / *

E-6/K

ISO 11359-1/-2

Combustibilidad a 1.5mm esp. nom.

HB / *

class

IEC 60695-11-10

Espesores de probeta

1.6 / *

Combustibilidad a espesor h

HB / *

class

IEC 60695-11-10

Espesores de probeta

3.2 / *

Propiedades eléctricas

Seco / Cond

Unidades

Método de ensayo

ISO Data

Constante dieléctrica, 1MHz

3.5 / 4.2

IEC 62631-2-1

Factor de pérdidas dieléctricas, 1MHz

180 / 1000

E-4

IEC 62631-2-1

Resistividad volumétrica específica

1E13 / 1E10

Ohm*m

IEC 62631-3-1

Resistividad superficial específica

* / 1E13

Ohm

IEC 62631-3-2

Resistencia dieléctrica

30 / 24

kV/mm

IEC 60243-1

Indice comparativo de linea de fuga

600 / 600

IEC 60112

Otras propiedades	Seco / Cond	Unidades	Método de ensayo
Absorción de agua	9.5 / *	%	Sim. to ISO 62
Absorción de humedad	3 / *	%	Sim. to ISO 62
Densidad	1140 / -	kg/m³	ISO 1183

Características

Procesamiento y forma de entrega

Moldeo por inyección

Forma de suministro

Granulado, Negro, Blanco

Características especiales

Estable contra rayos U.V./interperie, Estable contra el calor

Applicaciones

Automotriz, Construcción, Electrica

Disponibilidad regional

Europa

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.