Any use of this information falls under the rules of our
disclaimer.
Caracteristicas de procesamiento y fisicas | Valor | Unidades | Método de ensayo |
ISO Data |
Indice de fluidez volumétrico, MVR |
4 |
cm³/10min |
ISO 1133 |
Temperatura |
300 |
°C |
- |
Carga |
1.2 |
kg |
- |
Contracción posterior al moldeo, paralelo |
0.6 |
% |
ISO 294-4, 2577 |
Contracción posterior al moldeo, normal |
0.6 |
% |
ISO 294-4, 2577 |
Propiedades mecánicas | Valor | Unidades | Método de ensayo |
ISO Data |
Esfuerzo de fluencia |
65 |
MPa |
ISO 527 |
Alarg. nominal a rotura |
70 |
% |
ISO 527 |
Módulo de flexión, 23°C |
2400 |
MPa |
ISO 178 |
Resistencia a la flexión |
90 |
MPa |
ISO 178 |
Resistencia al impacto Charpy c/entalla, +23°C |
90 |
kJ/m² |
ISO 179/1eA |
Dureza Rockwell |
R 120 |
- |
ISO 2039-2 |
Propiedades térmicas | Valor | Unidades | Método de ensayo |
ISO Data |
Estabilidad al calor, 1.80 MPa |
130 |
°C |
ISO 75-1/-2 |
Estabilidad al calor, 0.45 MPa |
142 |
°C |
ISO 75-1/-2 |
Coef.de expansión térmica lineal, paralelo |
65 |
E-6/K |
ISO 11359-1/-2 |
Combustibilidad a espesor h |
V-0 |
class |
IEC 60695-11-10 |
Espesores de probeta |
0.8 |
mm |
- |
Propiedades eléctricas | Valor | Unidades | Método de ensayo |
ISO Data |
Indice comparativo de linea de fuga |
212 |
- |
IEC 60112 |
Propiedades opticas | Valor | Unidades | Método de ensayo |
ISO Data |
Transmitancia luminosa |
86[1] |
% |
ISO 13468-1, -2 |
ASTM Data |
Opacidad |
20[1] |
% |
ASTM D 1003 |
Otras propiedades | Valor | Unidades | Método de ensayo |
Densidad |
1200 |
kg/m³ |
ISO 1183 |
Recomendación para procesamiento Extrusión | Valor | Unidades | Método de ensayo |
Temperatura de pre-secado |
120 |
°C |
- |
Tiempo de pre-secado |
5 - 8 |
h |
- |
Temperatura del molde |
80 - 120 |
°C |
- |
Zona 1 |
260 - 300 |
°C |
- |
Características
Procesamiento y forma de entrega
Otros tipos de extrusión
Características especiales
Estable contra rayos U.V./interperie
Características
Light Diffusing
Applicaciones
Electrica
Disponibilidad regional
Norteamérica, Europa, Asia Pacifico
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com