Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of TAIRILITE® AC3843 - PC - Formosa Chemicals & Fibre Corp.

Material Data Center offers the following functions for TAIRILITE® AC3843:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Tairilite datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caracteristicas de procesamiento y fisicas - Propiedades mecánicas - Propiedades térmicas - Propiedades opticas - Otras propiedades
Any use of this information falls under the rules of our disclaimer.
Caracteristicas de procesamiento y fisicasValorUnidadesMétodo de ensayo
ISO Data
Índice de fluidez, MFI 12 g/10min ISO 1133
Temperatura 300 °C -
Carga 1.2 kg -
Contracción posterior al moldeo, paralelo 0.6 % ISO 294-4, 2577
ASTM Data
Índice de fluidez, MFI 12 g/10min ASTM D 1238
Temperatura 300 °C -
Carga 1.2 kg -
Contracción posterior al moldeo, paralelo 0.006 mm/mm ASTM D 955
Propiedades mecánicasValorUnidadesMétodo de ensayo
ISO Data
Esfuerzo de tracción 72 MPa ISO 527
Módulo de flexión, 23°C 2160 MPa ISO 178
Resistencia a la flexión 108 MPa ISO 178
Dureza Rockwell R 122 - ISO 2039-2
ASTM Data
Esfuerzo de tracción 71.1 MPa ASTM D 638
Módulo de flexión 2163 MPa ASTM D 790
Resistencia a la flexión 108 MPa ASTM D 790
Dureza Rockwell R 122 - ASTM D 785
Resistencia al impacto Izod con entalla, 1/8 in 830 J/m ASTM D 256
Propiedades térmicasValorUnidadesMétodo de ensayo
ISO Data
Estabilidad al calor, 1.80 MPa 128 °C ISO 75-1/-2
Combustibilidad a espesor h V-0 class IEC 60695-11-10
Espesores de probeta 3.0 mm -
Yellow Card disponible sí - -
ASTM Data
Combustibilidad UL 94 V-0 - UL 94
Espesores de probeta 3 mm -
Estabilidad al calor @ 264 psi 128 °C ASTM D 648
Propiedades opticasValorUnidadesMétodo de ensayo
ASTM Data
Opacidad 2 % ASTM D 1003
Transmitancia luminosa 88 % ASTM D 1003
Otras propiedadesValorUnidadesMétodo de ensayo
Densidad 1200 kg/m³ ISO 1183
Densidad 1200 kg/m³ ASTM D 792
Características
Características especiales
Resistencia mejorada al fuego, Sin halógeno, Estable contra rayos U.V./interperie, Transparente
Disponibilidad regional
Asia Pacifico
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.