Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of TPX® MX002 - PMP - Mitsui Chemicals America, Inc.

Material Data Center offers the following functions for TPX® MX002:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other TPX datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caracteristicas de procesamiento y fisicas - Propiedades mecánicas - Propiedades térmicas - Propiedades eléctricas - Propiedades opticas - Otras propiedades
Any use of this information falls under the rules of our disclaimer.
Caracteristicas de procesamiento y fisicasValorUnidadesMétodo de ensayo
ASTM Data
Índice de fluidez, MFI 21 g/10min ASTM D 1238
Temperatura 260 °C -
Carga 5 kg -
Contracción posterior al moldeo, paralelo 1.5 mm/mm ASTM D 955
Contracción posterior al moldeo, normal 1.1 mm/mm ASTM D 955
Propiedades mecánicasValorUnidadesMétodo de ensayo
ASTM Data
Módulo de tracción 889.4 MPa ASTM D 638
Esfuerzo de tracción 10 MPa ASTM D 638
Esfuerzo de fluencia a tracción 21 MPa ASTM D 638
Alargamiento a la rotura 60 % ASTM D 638
Módulo de flexión 1048 MPa ASTM D 790
Resistencia a la flexión 27 MPa ASTM D 790
Dureza Rockwell R42 - ASTM D 785
Resistencia al impacto Izod con entalla, 1/8 in 27.8 J/m ASTM D 256
Propiedades térmicasValorUnidadesMétodo de ensayo
ASTM Data
Coeficiente de dilatación térmica, long. 380 E-6/K ASTM D 696
Estabilidad al calor @ 66 psi 92.8 °C ASTM D 648
Temperatura Vicat 153 °C ASTM D 1525
Propiedades eléctricasValorUnidadesMétodo de ensayo
ASTM Data
Resistividad volumétrica 1E16 Ohm*cm ASTM D 257
Propiedades opticasValorUnidadesMétodo de ensayo
ASTM Data
Opacidad 2.1 % ASTM D 1003
Transmitancia luminosa 93 % ASTM D 1003
Índice de refracción 1.46 - ASTM D 542
Otras propiedadesValorUnidadesMétodo de ensayo
Densidad 833 kg/m³ ASTM D 792
Características
Procesamiento y forma de entrega
Moldeo por inyección, Extrusión de fibra, Extrusion del film, Otros tipos de extrusión, Moldeo por soplado
Disponibilidad regional
Norteamérica, Europa, Asia Pacifico
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.