Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of SABIC® PPcompound 95610CS20 - PP - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for SABIC® PPcompound 95610CS20:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Sabic datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Propiedades mecánicas - Propiedades térmicas - Otras propiedades
Any use of this information falls under the rules of our disclaimer.
Texto del producto
SABIC® PP customized solution (CS) is a concept based on a reactor elastomer-modified PP combined with a talcum filled masterbatch mixed at the injection-molding machine. SABIC® PP CS offers a low cost customized solution. The SABIC® PP CS concept offers optimal flexibility by creating the possibility to correct dimensions, if needed, in a fast, reliable and accurate way without affecting material logistics. This properties table contains typical values for SABIC® PP CS systems with 40% talcum masterbatch resulting in a material with 20% talcum. The polymer used is SABIC® PP 95610 and the masterbatch is the SABIC® PP compound 20MBT. IMDS ID: 16487435
Propiedades mecánicasValorUnidadesMétodo de ensayo
ISO Data
Módulo de tracción 1250 MPa ISO 527
Esfuerzo de fluencia 17 MPa ISO 527
Resistencia a la tracción 18 MPa ISO 527
Alargamiento a rotura >50 % ISO 527
Módulo de flexión, 23°C 1300 MPa ISO 178
Resistencia al impacto Charpy c/entalla, +23°C N kJ/m² ISO 179/1eA
Resistencia al impacto Izod con entalla 9 kJ/m² ISO 180/1A
Dureza Shore D 61 - ISO 7619-1
Propiedades térmicasValorUnidadesMétodo de ensayo
ISO Data
Estabilidad al calor, 0.45 MPa 90 °C ISO 75-1/-2
Temp. reblandecimiento Vicat, A 120 °C ISO 306
Otras propiedadesValorUnidadesMétodo de ensayo
Densidad 1040 kg/m³ ISO 1183
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.