Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of SABIC® HDPE F4520 - (PE-HD) - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for SABIC® HDPE F4520:
unit conversion, PDF datasheet print, comparison with other plastics, application examples, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Sabic datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Propiedades mecánicas - Propiedades térmicas
Any use of this information falls under the rules of our disclaimer.
Texto del producto
SABIC® HDPE F4520 is typically used for blow molding packaging up to 20 l, combining medium stiffness with a good ESCR. This grade is typically used for packaging of aggressive detergents and technical articles such as spare fuel tanks, air- and cable ducts. This product is not intended for and must not be used in any pharmaceutical/medical applications.
Propiedades mecánicasValorUnidadesMétodo de ensayo
ISO Data
Módulo de tracción 800 MPa ISO 527
Esfuerzo de fluencia 22 MPa ISO 527
Resistencia a la tracción 31 MPa ISO 527
Alargamiento a rotura >50 % ISO 527
Módulo de flexión, 23°C 850 MPa ISO 178
Resistencia a la flexión 22 MPa ISO 178
Resistencia al impacto Izod con entalla 5 kJ/m² ISO 180/1A
Dureza Shore D 59 - ISO 7619-1
Propiedades térmicasValorUnidadesMétodo de ensayo
ISO Data
Temperatura de fusión, 10°C/min 130 °C ISO 11357-1/-3
Estabilidad al calor, 0.45 MPa 73 °C ISO 75-1/-2
Temp. reblandecimiento Vicat, A 126 °C ISO 306
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.