Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of RamTal PM1409 - (POM+PTFE) - Polyram

Material Data Center offers the following functions for RamTal PM1409:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Ramtal datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Caracteristicas de procesamiento y fisicasValorUnidadesMétodo de ensayo
ISO Data
Índice de fluidez, MFI 7 g/10min ISO 1133
Temperatura 190 °C -
Carga 2.16 kg -
Contracción posterior al moldeo, paralelo 2.0 % ISO 294-4, 2577
Propiedades mecánicasValorUnidadesMétodo de ensayo
ISO Data
Módulo de tracción 2200 MPa ISO 527
Esfuerzo de fluencia 45 MPa ISO 527
Alargamiento a rotura 20 % ISO 527
Módulo de flexión, 23°C 1750 MPa ISO 178
Resistencia al impacto Izod con entalla, +23°C 4.5 kJ/m² ISO 180/1A
Dureza Rockwell R 70 - ISO 2039-2
ASTM Data
Resistencia a la flexión 65 MPa ASTM D 790
Propiedades térmicasValorUnidadesMétodo de ensayo
ISO Data
Temperatura de fusión, 10°C/min 165 °C ISO 11357-1/-3
Estabilidad al calor, 1.80 MPa 120 °C ISO 75-1/-2
Estabilidad al calor, 0.45 MPa 155 °C ISO 75-1/-2
Combustibilidad a espesor h HB class IEC 60695-11-10
Espesores de probeta 3.0 mm -
Propiedades eléctricasValorUnidadesMétodo de ensayo
ISO Data
Resistividad volumétrica específica >1E13 Ohm*m IEC 62631-3-1
Resistividad superficial específica 1E14 Ohm IEC 62631-3-2
Otras propiedadesValorUnidadesMétodo de ensayo
Absorción de agua 0.22 % Sim. to ISO 62
Densidad 1480 kg/m³ ISO 1183
Características
Forma de suministro
Sémola
Características
Bajo olor, Grado tribológico
Disponibilidad regional
Norteamérica, Europa, Asia Pacifico, América del Sur y Centroaméric, Próximo Oriente/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.