Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of NORYL™ Resin BN31 - Asia - (PPE+PS) - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for NORYL™ Resin BN31 - Asia:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Noryl datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Propiedades mecánicas - Propiedades térmicas - Otras propiedades - Recomendación para procesamiento Moldeo por inyección - Recomendación para procesamiento Extrusión
Any use of this information falls under the rules of our disclaimer.
Texto del producto
NORYL™ BN31 resin is a non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS). This blow moldable grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of 5VA at 2.5mm and V0 at 1.5mm along with a UL746C Outdoor Suitability rating of F1. NORYL BN31 resin exhibit good low temperature impact strength, heat resistance, excellent processability, Low warpage, and dimensional stability. The material is an excellent candidate for blow molded applications such as hospital bed headboard, cladding, tray.

UL Yellow Card Link E121562-221152
Propiedades mecánicasValorUnidadesMétodo de ensayo
ASTM Data
Esfuerzo de fluencia a tracción 48 MPa ASTM D 638
Módulo de flexión 2410 MPa ASTM D 790
Resistencia al impacto Izod con entalla, 1/8 in 267 J/m ASTM D 256
Resistencia al impacto Izod con entalla, baja temperatura 106 J/m ASTM D 256
Temperatura -40 °C -
Propiedades térmicasValorUnidadesMétodo de ensayo
ISO Data
Combustibilidad a 1.5mm esp. nom. V-0 class IEC 60695-11-10
Espesores de probeta 1.5 mm -
Combustibilidad 5V a espesor h 5VA class IEC 60695-11-20
Espesores de probeta 3.0 mm -
Otras propiedadesValorUnidadesMétodo de ensayo
Densidad 1100 kg/m³ ASTM D 792
Recomendación para procesamiento Moldeo por inyecciónValorUnidadesMétodo de ensayo
Temperatura de pre-secado 95 °C -
Recomendación para procesamiento ExtrusiónValorUnidadesMétodo de ensayo
Temperatura de pre-secado 95 °C -
Tiempo de pre-secado 2 - 4 h -
Temperatura de la masa 210 - 215 °C -
Temperatura del molde 50 - 70 °C -
Zona 1 215 - 205 °C -
Zona 2 205 - 215 °C -
Zona 3 205 - 215 °C -
Zona 4 210 - 215 °C -
Zona 5 210 - 215 °C -
Características
Procesamiento y forma de entrega
Moldeo por soplado
Aditivos
Ignifugante
Características especiales
Resistencia mejorada al fuego
Disponibilidad regional
Asia Pacifico
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.