Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.
This is the free Material Data Center Datasheet of Monprene® RG-20140 - TPE - Teknor Apex Co.
unit conversion, PDF datasheet print, comparison with other plastics
Check here, which other Monprene datasheets, application examples or technical articles are available in Material Data Center
The Monprene RG-20100 series is a group of high performance thermoplastic elastomers specifically designed for extruded regulated applications including food contact, toys, and children's products. Monprene RG-20140 is a low density, low hardness grade that complies with various US FDA and European regulations and directives for food contact and toy safety and is suitable for extrusion.
Property | Value | Unit | Standard |
---|---|---|---|
Tensile Stress at 100% (across flow) | 0.8 | MPa | ISO 37 |
Tensile Stress at Break (across flow) | 6 | MPa | ISO 37 |
Tensile Strain at Break (across flow) | 800 | % | ISO 37 |
Apparent Viscosity (200 °C, 206 1/s) | 290 | Pas | ASTM D3835 |
Caracteristicas de procesamiento y fisicas | Valor | Unidades | Método de ensayo | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ASTM Data | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Índice de fluidez, MFI | 0.5 | g/10min | ASTM D 1238 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Temperatura | 200 | °C | - | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Carga | 5 | kg | - |
Propiedades mecánicas | Valor | Unidades | Método de ensayo | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ISO Data | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Tensión a 100% alargamiento | 2 | MPa | ISO 527 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Alargamiento a rotura | 140 | % | ISO 37 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Deformación permanente por compresión a 23°C, 24h | 11 | % | ISO 815 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Deformación permanente por compresión a 70°C, 24h | 21 | % | ISO 815 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Dureza Shore A | 40 | - | ISO 7619-1 |
Otras propiedades | Valor | Unidades | Método de ensayo |
Densidad | 890 | kg/m³ | ISO 1183 |
Recomendación para procesamiento Extrusión | Valor | Unidades | Método de ensayo |
Temperatura de pre-secado | 65 | °C | - |
Tiempo de pre-secado | 2 - 4 | h | - |
Zona 1 | 149 - 160 | °C | - |
Zona 2 | 160 - 204 | °C | - |
Zona 3 | 171 - 216 | °C | - |
Zona 4 | 182 - 227 | °C | - |
Temperatura de boquilla | 182 - 227 | °C | - |
Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.
Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.