Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Melopas® MF 3025 - MF-L - Raschig GmbH

Material Data Center offers the following functions for Melopas® MF 3025:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Melopas datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caracteristicas de procesamiento y fisicas - Propiedades mecánicas - Propiedades térmicas - Propiedades eléctricas - Otras propiedades
Any use of this information falls under the rules of our disclaimer.
Caracteristicas de procesamiento y fisicasValorUnidadesMétodo de ensayo
ISO Data
Contracción posterior al moldeo, paralelo 1.0 % ISO 294-4, 2577
Conductibilidad termica de fusión 0.45 W/(m K) -
Propiedades mecánicasValorUnidadesMétodo de ensayo
ISO Data
Módulo de tracción 6500 MPa ISO 527
Esfuerzo de tracción 70 MPa ISO 527
Módulo de flexión, 23°C 8000 MPa ISO 178
Resistencia al impacto Charpy, +23°C 11 kJ/m² ISO 179/1eU
Resistencia al impacto Charpy c/entalla, +23°C 2 kJ/m² ISO 179/1eA
Propiedades térmicasValorUnidadesMétodo de ensayo
ISO Data
Estabilidad al calor, 1.80 MPa 170 °C ISO 75-1/-2
Estabilidad al calor, 8.00 MPa 130 °C ISO 75-1/-2
Coef.de expansión térmica lineal, paralelo 25 E-6/K ISO 11359-1/-2
Combustibilidad a 1.5mm esp. nom. V-0 class IEC 60695-11-10
Espesores de probeta 1.5 mm -
Propiedades eléctricasValorUnidadesMétodo de ensayo
ISO Data
Constante dieléctrica, 100Hz 13.5 - IEC 62631-2-1
Constante dieléctrica, 1MHz 8 - IEC 62631-2-1
Factor de pérdidas dieléctricas, 100Hz 4000 E-4 IEC 62631-2-1
Factor de pérdidas dieléctricas, 1MHz 400 E-4 IEC 62631-2-1
Resistividad volumétrica específica 1E10 Ohm*m IEC 62631-3-1
Resistividad superficial específica 1E11 Ohm IEC 62631-3-2
Resistencia dieléctrica 17.5 kV/mm IEC 60243-1
Indice comparativo de linea de fuga 600 - IEC 60112
ASTM Data
Resistencia al arco 5 s ASTM D 495
Otras propiedadesValorUnidadesMétodo de ensayo
Densidad 1750 kg/m³ ISO 1183
Bulk density 700 kg/m³ -
Características
Procesamiento y forma de entrega
Moldeo por inyección, Moldeo por compresión
Forma de suministro
Sémola
Características especiales
Estable contra rayos U.V./interperie, Estable contra el calor
Resistencia quimica
Resistencia química general
Certifications
Contiene recursos renovables
Disponibilidad regional
Norteamérica, Europa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.