Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LEXAN™ FR Resin LF1520A - (PC+PTFE)-GF20 - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for LEXAN™ FR Resin LF1520A:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Lexan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caracteristicas de procesamiento y fisicas - Propiedades mecánicas - Propiedades térmicas - Propiedades eléctricas - Otras propiedades - Recomendación para procesamiento Moldeo por inyección
Any use of this information falls under the rules of our disclaimer.
Texto del producto
LEXAN LF1520A is a compound based on Polycarbonate (PC) resin containing 20% glass fiber and 15% PTFE. Added features of this material include: flame retardant, wear resistant and tight tolerance.

UL Yellow Card Link1: E121562-220960
UL Yellow Card Link2: E207780-228438
Caracteristicas de procesamiento y fisicasValorUnidadesMétodo de ensayo
ASTM Data
Contracción posterior al moldeo, paralelo 0.002 mm/mm ASTM D 955
Contracción posterior al moldeo, normal 0.0032 mm/mm ASTM D 955
Propiedades mecánicasValorUnidadesMétodo de ensayo
ASTM Data
Esfuerzo de fluencia a tracción 93 MPa ASTM D 638
Esfuerzo de fractura a tracción 93 MPa ASTM D 638
Alargamiento a la fluencia 5 % ASTM D 638
Alargamiento a la rotura 5 % ASTM D 638
Módulo de flexión 6200 MPa ASTM D 790
Resistencia al impacto Izod con entalla, 1/8 in 112 J/m ASTM D 256
Resistencia al impacto Izod, 1/8 in 534 J/m ASTM D 256
Propiedades térmicasValorUnidadesMétodo de ensayo
ASTM Data
Combustibilidad UL 94 V-0 - UL 94
Espesores de probeta 1.5 mm -
Coeficiente de dilatación térmica, long. 30.6 E-6/K ASTM D 696
Coeficiente de dilatación térmica, normal 52.2 E-6/K ASTM D 696
Estabilidad al calor @ 66 psi 133 °C ASTM D 648
Estabilidad al calor @ 264 psi 128 °C ASTM D 648
Propiedades eléctricasValorUnidadesMétodo de ensayo
ISO Data
Indice comparativo de linea de fuga 212 - IEC 60112
ASTM Data
Resistencia al arco 150 s ASTM D 495
Otras propiedadesValorUnidadesMétodo de ensayo
Densidad 1470 kg/m³ ASTM D 792
Recomendación para procesamiento Moldeo por inyecciónValorUnidadesMétodo de ensayo
Temperatura de pre-secado 120 °C -
Tiempo de pre-secado 3 - 4 h -
Humedad de procesamiento ≤0.02 % -
Temperatura de la masa 290 - 310 °C -
Temperatura del molde 70 - 95 °C -
Zona 1 265 - 290 °C -
Zona 2 275 - 300 °C -
Zona 3 290 - 310 °C -
Temperatura de boquilla 280 - 305 °C -
Velocidad de giro de husillo 40 - 70 rpm -
Contrapresión 0.3 - 0.7 MPa -
Características
Procesamiento y forma de entrega
Moldeo por inyección
Aditivos
Lubricante
Características especiales
Resistencia mejorada al fuego
Applicaciones
IT / Equipo de oficina, Electrica
Disponibilidad regional
Norteamérica, Europa, Asia Pacifico, América del Sur y Centroaméric
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.