Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LEXAN™ Copolymer HFD4413 - Europe - PC-GF30 - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for LEXAN™ Copolymer HFD4413 - Europe:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Lexan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caracteristicas de procesamiento y fisicas - Propiedades mecánicas - Propiedades térmicas - Otras propiedades - Recomendación para procesamiento Moldeo por inyección
Any use of this information falls under the rules of our disclaimer.
Texto del producto
LEXAN HFD4413 is a 30% glass filled, injection moldable grade designed for high flow and superior surface appearance. Internal mold release.
Caracteristicas de procesamiento y fisicasValorUnidadesMétodo de ensayo
ISO Data
Indice de fluidez volumétrico, MVR 18 cm³/10min ISO 1133
Temperatura 300 °C -
Carga 1.2 kg -
ASTM Data
Índice de fluidez, MFI 16 g/10min ASTM D 1238
Temperatura 300 °C -
Carga 1.2 kg -
Propiedades mecánicasValorUnidadesMétodo de ensayo
ISO Data
Esfuerzo de fluencia 115 MPa ISO 527
Alarg. en límite elástico 2.5 % ISO 527
Resistencia a la tracción 125 MPa ISO 527
Alargamiento a rotura 2.1 % ISO 527
Resistencia al impacto Charpy, +23°C, 3mm 40 kJ/m² ISO 179/1eU
Resistencia al impacto Charpy, -30°C, 3mm 49 kJ/m² ISO 179/1eU
Resistencia al impacto Charpy c/entalla, +23°C, 3mm 12 kJ/m² ISO 179/1eA
Resistencia al impacto Charpy c/entalla, -30°C, 3mm 11 kJ/m² ISO 179/1eA
Resistencia al impacto Izod, +23°C 37 kJ/m² ISO 180/1U
. impacto Izod c/entalla, +23°C, 3mm 10 kJ/m² ISO 180/1A
Res. impacto Izod c/entalla, -30°C, 3mm 10 kJ/m² ISO 180/1A
ASTM Data
Módulo de tracción 7870 MPa ASTM D 638
Esfuerzo de fluencia a tracción 111 MPa ASTM D 638
Esfuerzo de fractura a tracción 111 MPa ASTM D 638
Alargamiento a la fluencia 3 % ASTM D 638
Módulo de flexión 7760 MPa ASTM D 790
Resistencia al impacto Izod con entalla, 1/8 in 133 J/m ASTM D 256
Resistencia al impacto Izod, 1/8 in 852 J/m ASTM D 256
Propiedades térmicasValorUnidadesMétodo de ensayo
ISO Data
Estabilidad al calor, 1.80 MPa 129 °C ISO 75-1/-2
Temp. reblandecimiento Vicat, 120°C/h 50N 143 °C ISO 306
ASTM Data
Estabilidad al calor @ 66 psi 130 °C ASTM D 648
Estabilidad al calor @ 264 psi 125 °C ASTM D 648
Otras propiedadesValorUnidadesMétodo de ensayo
Absorción de agua 0.3 % Sim. to ISO 62
Absorción de humedad 0.12 % Sim. to ISO 62
Densidad 1440 kg/m³ ISO 1183
Densidad 1430 kg/m³ ASTM D 792
Recomendación para procesamiento Moldeo por inyecciónValorUnidadesMétodo de ensayo
Temperatura de pre-secado 120 °C -
Tiempo de pre-secado 3 - 4 h -
Humedad de procesamiento ≤0.02 % -
Temperatura de la masa 290 - 310 °C -
Temperatura del molde 70 - 95 °C -
Zona 1 265 - 290 °C -
Zona 2 275 - 300 °C -
Zona 3 290 - 310 °C -
Velocidad de giro de husillo 40 - 70 rpm -
Contrapresión 0.3 - 0.7 MPa -
Características
Procesamiento y forma de entrega
Moldeo por inyección
Disponibilidad regional
Europa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.