Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Halene - H B6401 - (PE-HD) - Haldia Petrochemicals

Material Data Center offers the following functions for Halene - H B6401:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Halene datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caracteristicas de procesamiento y fisicas - Propiedades mecánicas - Propiedades térmicas - Otras propiedades - Recomendación para procesamiento Extrusión
Any use of this information falls under the rules of our disclaimer.
Texto del producto
B6401 is a Blow Molding Grade HDPE produced by the Mitsui CX Process.

This resin is particularly recommended for upto 20-liter containers for Lubricants and Edible oils.

B6401 combines exceptional processability with high rigidity, excellent mechanical properties and impact resistance.
Caracteristicas de procesamiento y fisicasValorUnidadesMétodo de ensayo
ASTM Data
Índice de fluidez, MFI 0.4 g/10min ASTM D 1238
Temperatura 190 °C -
Carga 2.16 kg -
Propiedades mecánicasValorUnidadesMétodo de ensayo
ASTM Data
Esfuerzo de fluencia a tracción 32 MPa ASTM D 638
Esfuerzo de fractura a tracción 40 MPa ASTM D 638
Alargamiento a la rotura 1000 % ASTM D 638
Módulo de flexión 1350 MPa ASTM D 790
Dureza D Shore 68 - ASTM D 2240
Resistencia al impacto Izod con entalla, 1/8 in 300 J/m ASTM D 256
Propiedades térmicasValorUnidadesMétodo de ensayo
ASTM Data
Estabilidad al calor @ 66 psi 67 °C ASTM D 648
Temperatura de fusión 135 °C ASTM D 3418
Temperatura Vicat 129 °C ASTM D 1525
Otras propiedadesValorUnidadesMétodo de ensayo
Densidad 960 kg/m³ ASTM D 792
Recomendación para procesamiento ExtrusiónValorUnidadesMétodo de ensayo
Temperatura de la masa 185 - 190 °C -
Zona 1 150 °C -
Zona 2 160 °C -
Zona 3 165 °C -
Zona 4 175 °C -
Temperatura de boquilla 180 - 185 °C -
Características
Procesamiento y forma de entrega
Moldeo por soplado
Características especiales
Alto impacto o modificado al impacto
Resistencia quimica
Resistencia al aceite
Disponibilidad regional
Asia Pacifico
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.