Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Grilamid TR 90 LXS natural - PAMACM12 - EMS-GRIVORY | a unit of EMS-CHEMIE AG

Material Data Center offers the following functions for Grilamid TR 90 LXS natural:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Grilamid datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caracteristicas de procesamiento y fisicas - Propiedades mecánicas - Propiedades térmicas - Propiedades eléctricas - Otras propiedades
Any use of this information falls under the rules of our disclaimer.
Texto del producto
Product-nomenclature: ISO 16396-PAMACM12 PA12,,GHLT,C18-020

 

Transparent Polyamide

Product Attributes

  Improved flowability and demoulding, Improved alcohol resistance, Improved impact resistance,
Highly transparent

Markets

  Automotive
  Automotive electr. and electronics, lighting, Cooling and climate control, Fuel systems,
Powertrain and Chassis, Interior
  Electricals & Electronics
  Electrical appliances, Electrical equipment, Connectors, Energy distribution,
Mobile phones and other portable devices, Lighting
  Industry & Consumer goods
  Housewares, Hydraulics & Pneumatics, Mechanical Engineering, Medical devices, Power transmission,
Sanitary, water and gas supply, Sports & Leisure, Tools & Accessories
  Optics
  Optical components, Safety glasses, Sunglasses, Spectacle frames

Approvals

  Food Contact
  EU Requirements, FDA
  Medical
  ISO 10993
Caracteristicas de procesamiento y fisicasSeco / CondUnidadesMétodo de ensayo
ISO Data
Contracción posterior al moldeo, paralelo 0.5 / * % ISO 294-4, 2577
Contracción posterior al moldeo, normal 0.6 / * % ISO 294-4, 2577
Propiedades mecánicasSeco / CondUnidadesMétodo de ensayo
ISO Data
Módulo de tracción - / 1500 MPa ISO 527
Esfuerzo de fluencia - / 60 MPa ISO 527
Alarg. en límite elástico - / 6 % ISO 527
Alarg. nominal a rotura - / >50 % ISO 527
Resistencia al impacto Charpy, +23°C - / N kJ/m² ISO 179/1eU
Resistencia al impacto Charpy, -30°C - / N kJ/m² ISO 179/1eU
Resistencia al impacto Charpy c/entalla, +23°C - / 9 kJ/m² ISO 179/1eA
Resistencia al impacto Charpy c/entalla, -30°C - / 12 kJ/m² ISO 179/1eA
Propiedades térmicasSeco / CondUnidadesMétodo de ensayo
ISO Data
Temp. de transición vítrea, 10°C/min 125 / * °C ISO 11357-1/-2
Estabilidad al calor, 1.80 MPa 80 / * °C ISO 75-1/-2
Estabilidad al calor, 0.45 MPa 100 / * °C ISO 75-1/-2
Coef.de expansión térmica lineal, paralelo 90 / * E-6/K ISO 11359-1/-2
Coef.de expansión térmica lineal, normal 90 / * E-6/K ISO 11359-1/-2
Combustibilidad a espesor h HB / * class IEC 60695-11-10
Espesores de probeta 0.8 / * mm -
Propiedades eléctricasSeco / CondUnidadesMétodo de ensayo
ISO Data
Resistividad volumétrica específica - / 1E11 Ohm*m IEC 62631-3-1
Resistividad superficial específica * / 1E12 Ohm IEC 62631-3-2
Resistencia dieléctrica - / 35 kV/mm IEC 60243-1
Indice comparativo de linea de fuga - / 600 - IEC 60112
Otras propiedadesSeco / CondUnidadesMétodo de ensayo
Absorción de agua 3 / * % Sim. to ISO 62
Absorción de humedad 1.5 / * % Sim. to ISO 62
Densidad 1000 / - kg/m³ ISO 1183
Características
Procesamiento y forma de entrega
Moldeo por inyección
Forma de suministro
Granulado, Color natural
Aditivos
Lubricante, Desmoldeante
Características especiales
Alto impacto o modificado al impacto, Transparente
Certifications
Contacto con alimentos, Aprobado por el FDA 21 CFR, Biocompatibility ISO 10993
Applicaciones
Automotriz, Electrica, Médico, Equipos deportivos
Disponibilidad regional
Norteamérica, Europa, Asia Pacifico, América del Sur y Centroaméric, Próximo Oriente/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.