Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Flomat 536/35 - UP-GF35 - Devi Polymers Private Limited

Material Data Center offers the following functions for Flomat 536/35:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Flomat datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caracteristicas de procesamiento y fisicas - Propiedades mecánicas - Propiedades térmicas - Propiedades eléctricas - Otras propiedades
Any use of this information falls under the rules of our disclaimer.
Caracteristicas de procesamiento y fisicasValorUnidadesMétodo de ensayo
Other Standards[S]
Contracción posterior al moldeo, paralelo 0.1 % BS-2782
S: These properties are reported by the producer according standards that are different to our defaults.
Propiedades mecánicasValorUnidadesMétodo de ensayo
Other Standards[S]
Esfuerzo de tracción 118 MPa BS-2782
Resistencia a la flexión 230 MPa BS-2782
Resistencia de compresión 245 MPa BS-2782
S: These properties are reported by the producer according standards that are different to our defaults.
Propiedades térmicasValorUnidadesMétodo de ensayo
ASTM Data
Combustibilidad UL 94 V-0 - UL 94
Propiedades eléctricasValorUnidadesMétodo de ensayo
ASTM Data
Resistencia al arco 180 s ASTM D 495
Other Standards[S]
Resistividad volumétrica específica 1E12 Ohm*m DIN 53482
Resistividad superficial específica 1E12 Ohm DIN 53482
Resistencia dieléctrica 11 kV/mm BS 2782
S: These properties are reported by the producer according standards that are different to our defaults.
Otras propiedadesValorUnidadesMétodo de ensayo
Other Standards[S]
Absorción de agua 0.25 % BS-2782
Densidad 1800 kg/m³ BS-2782
S: These properties are reported by the producer according standards that are different to our defaults.
Características
Procesamiento y forma de entrega
Moldeo por compresión
Forma de suministro
Compuesto de moldeo en laminas
Disponibilidad regional
Asia Pacifico
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.