Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of DuraForm® HST Composite - PA12-X - 3D Systems Corporation

Material Data Center offers the following functions for DuraForm® HST Composite:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Duraform datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Propiedades mecánicas - Propiedades térmicas - Propiedades eléctricas - Otras propiedades
Any use of this information falls under the rules of our disclaimer.
Propiedades mecánicasValorUnidadesMétodo de ensayo
ASTM Data
Módulo de tracción 5605 MPa ASTM D 638
Esfuerzo de tracción 49.6 MPa ASTM D 638
Alargamiento a la rotura 4.5 % ASTM D 638
Módulo de flexión 4475 MPa ASTM D 790
Resistencia a la flexión 85.8 MPa ASTM D 790
Dureza D Shore 75 - ASTM D 2240
Gardner impacto 5.02 J ASTM D 2794,4226,5420
Resistencia al impacto Izod con entalla, 1/8 in 37.4 J/m ASTM D 256
Resistencia al impacto Izod, 1/8 in 310 J/m ASTM D 256
Propiedades térmicasValorUnidadesMétodo de ensayo
ASTM Data
Combustibilidad UL 94 HB - UL 94
Estabilidad al calor @ 66 psi 184 °C ASTM D 648
Estabilidad al calor @ 264 psi 179 °C ASTM D 648
Other Standards[S]
Coeficiente de dilatación térmica, long. 139 E-6/K ASTM E 831
Calor específico 1040 J/(kg K) ASTM E 1269
S: These properties are reported by the producer according standards that are different to our defaults.
Propiedades eléctricasValorUnidadesMétodo de ensayo
ASTM Data
Resistencia dieléctrica, tiempo corto 18.5 kV/mm ASTM D 149
Resistividad superficial 5.2E15 Ohm ASTM D 257
Resistividad volumétrica 6.7E15 Ohm*cm ASTM D 257
Otras propiedadesValorUnidadesMétodo de ensayo
Densidad 1200 kg/m³ ASTM D 792
Características
Procesamiento y forma de entrega
Additive Manufacturing
Forma de suministro
Polvo, Blanco
Applicaciones
Avión y aeroespacial, Electrica, Equipos deportivos
Disponibilidad regional
Norteamérica, Europa, Asia Pacifico
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.