Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Desmopan 3860D - (TPU+ABS) - Covestro Deutschland AG

Check here, which other Desmopan datasheets, application examples or technical articles are available in Material Data Center

Propiedades mecánicas - Otras propiedades - Recomendación para procesamiento Moldeo por inyección - Funciones

Any use of this information falls under the rules of our disclaimer.

Texto del producto

• Injection molding grade
• modified with ABS
• good low-temperature flexibility
• good wear resistance
  Application:
• Ski boot shells
• Injection molded engineering parts

Propiedades mecánicas	Valor	Unidades	Método de ensayo
ISO Data
Módulo de flexión, 23°C	230	MPa	ISO 178
Tensión a 10% alargamiento	13	MPa	ISO 527
Tensión a 100% alargamiento	25	MPa	ISO 527
Tensión a 300% alargamiento	44	MPa	ISO 527
Resistencia a la tracción TPE	52	MPa	ISO 527
Alargamiento a rotura TPE	>300	%	ISO 527
Esfuerzo de tracción	52	MPa	ISO 37
Alargamiento a rotura	430	%	ISO 37
Deformación permanente por compresión a 70°C, 24h	59	%	ISO 815
Resistencia al desgarro	175	kN/m	ISO 34-1
Resistencia a la abrasión	39	mm³	ISO 4649
Dureza Shore D	59	-	ISO 7619-1

Otras propiedades	Valor	Unidades	Método de ensayo
Densidad	1200	kg/m³	ISO 1183

Recomendación para procesamiento Moldeo por inyección	Valor	Unidades	Método de ensayo
Temperatura de pre-secado	100 - 110	°C	-
Temperatura de la masa	235 - 245	°C	-
Temperatura del molde	40 - 50	°C	-

Funciones

Características

Procesamiento y forma de entrega

Moldeo por inyección

Características especiales

Alto impacto o modificado al impacto

Applicaciones

Equipos deportivos

Disponibilidad regional

Norteamérica, Europa, Asia Pacifico, América del Sur y Centroaméric, Próximo Oriente/Africa

Demás información

Moldeo por inyección

PROCESSING
Melt temperature: 235-245 °C

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.