Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Bormed™ HF840MO - PP - Borealis A/S

Material Data Center offers the following functions for Bormed™ HF840MO:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Bormed datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Caracteristicas de procesamiento y fisicasValorUnidadesMétodo de ensayo
ISO Data
Índice de fluidez, MFI 19 g/10min ISO 1133
Temperatura 230 °C -
Carga 2.16 kg -
Propiedades mecánicasValorUnidadesMétodo de ensayo
ISO Data
Módulo de tracción 1250 MPa ISO 527
Esfuerzo de fluencia 29.5 MPa ISO 527
Alarg. en límite elástico 11 % ISO 527
Módulo de flexión, 23°C 1250 MPa ISO 178
Resistencia al impacto Charpy c/entalla, +23°C 3 kJ/m² ISO 179/1eA
Propiedades térmicasValorUnidadesMétodo de ensayo
ISO Data
Temperatura de fusión, 10°C/min 160 °C ISO 11357-1/-3
Estabilidad al calor, 0.45 MPa 85 °C ISO 75-1/-2
Otras propiedadesValorUnidadesMétodo de ensayo
Densidad 905 kg/m³ ISO 1183
Recomendación para procesamiento Moldeo por inyecciónValorUnidadesMétodo de ensayo
Temperatura de la masa 210 - 260 °C -
Temperatura del molde 30 - 40 °C -
Presión de mantenimiento 20 - 50 MPa -
Características
Procesamiento y forma de entrega
Moldeo por inyección
Aditivos
Agente antibloqueo
Características especiales
Esterilizable, Esterilización por óxido de etileno (EtO), Esterilización por vapor
Características
Baja deformación, Grado tribológico, Homopolímero
Certifications
Grado médico, Device Master File
Applicaciones
Médico, Empacado
Disponibilidad regional
Norteamérica, Europa, Asia Pacifico, América del Sur y Centroaméric, Próximo Oriente/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.