Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Bio-Flex® F 1801 - PLA... - FKuR Kunststoff GmbH

Material Data Center offers the following functions for Bio-Flex® F 1801:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Bio-Flex datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caracteristicas de procesamiento y fisicas - Propiedades térmicas - Otras propiedades - Propiedades mecánicas (Film) - Recomendación para procesamiento Extrusión
Any use of this information falls under the rules of our disclaimer.
Texto del producto
Biodegradable and home compostable polymer compound suitable for blown film applications. Use in applications such as fruit bags.
Caracteristicas de procesamiento y fisicasValorUnidadesMétodo de ensayo
ISO Data
Índice de fluidez, MFI 3.5 g/10min ISO 1133
Temperatura 190 °C -
Carga 2.16 kg -
Propiedades térmicasValorUnidadesMétodo de ensayo
ISO Data
Temperatura de fusión, 10°C/min 155 °C ISO 11357-1/-3
Otras propiedadesValorUnidadesMétodo de ensayo
Densidad 1250 kg/m³ ISO 1183
Propiedades mecánicas (Film)ValorUnidadesMétodo de ensayo
ISO Data
Módulo de tracción, paralelo 300 MPa ISO 527-3
Módulo de tracción, normal 170 MPa ISO 527-3
Alargamiento a fluencia, paralelo 185 % ISO 527-3
Alargamiento a fluencia, normal 8 % ISO 527-3
Resistencia a la tracción, paralelo 35 MPa ISO 527-3
Resistencia a la tracción, normal 40 MPa ISO 527-3
Alargamiento máximo, paralelo 185 % ISO 527-3
Alargamiento máximo, normal 560 % ISO 527-3
Tipo de extrusión soplado - -
Espesor de la muestra 0.015 mm -
Recomendación para procesamiento ExtrusiónValorUnidadesMétodo de ensayo
Type of extrusion film - -
Temperatura de pre-secado 60 °C -
Tiempo de pre-secado 2 - 4 h -
Temperatura de la masa <190 °C -
Temperatura - zona de alimentación 40 - 60 °C -
Zona 1 155 °C -
Zona 2 160 °C -
Zona 3 165 °C -
Zona 4 170 °C -
Temperatura de boquilla 165 °C -
Características
Procesamiento y forma de entrega
Extrusión de película soplada, Extrusion del film
Forma de suministro
Sémola
Características especiales
Translucent
Certifications
Contiene recursos renovables, Biodegradables, Contacto con alimentos, Compostable ISO 13432 (Certificado)
Applicaciones
Empacado, Juguetes
Disponibilidad regional
Norteamérica, Europa, Asia Pacifico, América del Sur y Centroaméric, Próximo Oriente/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.